WONDER — The Mystery
The Speed Story
A car's speed is plotted on a graph: speed on the y-axis, time (t) on the x-axis. The graph tells a story: accelerating (sloping up), cruising (flat), braking (sloping down).
But the graph hides a secret: the AREA under the curve is the DISTANCE traveled! The slope tells you how quickly speed changes, while the space under the line tells you how far you've gone.
The Mystery:
How can the space under a line tell you how far you've gone? Slope is a number — but the area is a region. Why is the area equal to the distance?
Today’s Mission: read speed, changes in speed, and distance from straight speed–time segments. Compare journeys and explain why equal speeds alone do not prove equal positions.
PREDICT — Commit to Your Answer
DOK 2 — PredictScenario: The recorded speed is 6 m/s throughout the interval from 0 to 5 s.
How far does the car travel during this interval?
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct answer: A) 30 m
The useful WHY is “Use both plotted quantities over the interval.” Constant speed makes a rectangle: distance = speed × elapsed time = 6 × (5 − 0) = 30 m. The units are (m/s) × s = m.
Graph height gives speed; gradient gives its rate of change; area gives distance. A flat line at non-zero speed means motion at constant speed.
🎮 PLAY — The Speed–Time Graph Lab
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: choose initial and final speeds, or initial speed and acceleration, plus the duration. Complete a valid run using Play or Step.
- • OBSERVE: watch the speed trace build and the distance travelled grow with its shaded area.
- • DISCOVER: compare rising, falling and flat lines. The model keeps speed non-negative and uses a fixed positive direction.
These straight segments have constant acceleration in a fixed positive direction, without reversal. End speeds mode uses initial speed, final speed and duration to calculate acceleration. Set acceleration mode calculates final speed. A negative final speed is invalid in this model: change a given before running. Playback is accelerated; t is physical elapsed time.
Reading the diagram: time is horizontal and speed vertical. Cyan is elapsed motion; grey dashes show the plan. The shaded region gives distance so far. The lower track shows the car’s travel on a fixed metre scale for this run.
Status: Ready
A speed cannot be negative in this fixed-direction model. Adjust the initial speed, acceleration or duration.
Live Readouts
Try these experiments
Choose a preset, predict its distance and graph shape, then press Play. Presets do not start playback.
DISCOVER — The Golden Rules
DOK 1 — RecallYou've played with the Speed-Time Graph Lab. Now flip each card to reveal the four golden rules for interpreting speed-time graphs.
Rule #1
Slope → acceleration in this model
Click to flip
Gradient and speed
Gradient = Δspeed/Δt. A rising line means increasing speed; a falling line means decreasing speed; a flat line means constant speed. In this mission’s fixed positive direction, the gradient equals signed acceleration. Units: m/s². Compare steepness only using the same axis scales.
Rule #2
Area = Distance
Click to flip
Area gives distance
A speed–time area has units (m/s) × s = m. Rectangle: d = speed × Δt. Triangle: d = ½ × base × height, for a straight segment from or to zero speed. Trapezoid: d = ½(v₁ + v₂)Δt, for a straight segment.
Rule #3
Trapezoid Extraction
Click to flip
Build a journey
For a multi-stage journey, find each segment’s elapsed time using its two time coordinates. Split the area into rectangles, triangles or trapezoids and add all distances. The endpoint mean (v₁ + v₂)/2 gives average speed only for a straight speed–time segment.
Rule #4
Intercept & Catch-Up
Click to flip
Equal speed or position?
An intersection means equal speed, not equal position. With the same start and fixed direction, equal accumulated areas mean equal positions; larger area means farther travel. Different starting positions require the initial separation. Speed alone does not record direction.
All four rules unlocked!
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzePick TRUE or FALSE for each myth. The truth will be revealed instantly.
💀 Myth #1: "The slope of a speed-time graph gives the distance traveled."
Correct — the claim is false.
Gradient gives the rate of change of speed, with units m/s². Area gives distance, with units m. In this mission’s fixed positive direction, the gradient equals signed acceleration.
💀 Myth #2: "A flat horizontal line on a speed-time graph means the object is stopped."
Correct — the claim is false.
A horizontal line means constant speed. At a positive height the object is moving; only a speed of zero means at rest. A speed–time graph does not record direction, so it cannot by itself distinguish different directions of motion at the same speed.
Myths destroyed! You're inoculated against the two biggest speed–time graph traps.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyAnswer four graph questions. Each diagram supplies the data; the tiles record correct responses. Get all four right to unlock practice.
Live Speed–Time Graph Scene
Current Question Graph
Waiting for Q1...
Instructor Q1 — Concept
For the fixed positive direction used here, what does a straight speed–time gradient represent?
Instructor Q2 — Concept
What does the area between a speed–time trace and the time axis represent?
Instructor Q3 — Compute Slope
The straight segment joins (0 s, 5 m/s) and (4 s, 25 m/s). Find its gradient in m/s².
Instructor Q4 — Compute Area
The recorded speed is 10 m/s from 2 s to 8 s. Find the distance travelled over this recorded interval, in m.
4/4 — Speed–Time Graph Mastered!
You now know: area = distance, while slope is the rate of change of speed and corresponds to acceleration in this Mission’s fixed-direction model. Time to practice!
✎ PRACTICE — Read the Speed–Time Graph
DOK 1–3 — PracticeChallenge 1: The Cruising Record
The recorded speed is 18 m/s from 0 to 7 s. Find the distance travelled in m.
Step-by-Step Solution
Step 1 — Identify: constant speed gives a rectangular area.
Step 2 — Substitute: d = 18 × (7 − 0).
Step 3 — Solve: d = 126 m.
Challenge 2: The Three-Stage Journey
The speed–time trace joins (0 s, 0 m/s), (4 s, 24 m/s), (7 s, 24 m/s) and (9 s, 0 m/s) with straight segments. Find the total distance travelled from 0 to 9 s, in m.
Step-by-Step Solution
Step 1 — Identify: a triangle from 0–4 s, rectangle from 4–7 s, and triangle from 7–9 s.
Step 2 — Calculate: d₁ = ½ × 4 × 24 = 48 m; d₂ = (7 − 4) × 24 = 72 m; d₃ = ½ × (9 − 7) × 24 = 24 m.
Step 3 — Add: total distance = 48 + 72 + 24 = 144 m. Never use a single endpoint average for this whole multi-stage journey.
Challenge 3: Audit the Race Report
A and B start at the same position at t = 0 and move in the same fixed direction. A travels at 8 m/s until 6 s. B’s straight speed–time line joins (0 s, 0 m/s) and (6 s, 16 m/s). A student reports: “At 3 s their speeds are equal, so their positions are equal. By 6 s B has travelled farther because its final speed is greater.” Find each object’s distance from 0 to 6 s and explain both errors.
Step-by-Step Solution
Step 1 — Correct the distances: A: 8 × 6 = 48 m. B: ½ × 6 × 16 = 48 m.
Step 2 — Audit 3 s: both speeds are 8 m/s, but A has travelled 8 × 3 = 24 m; B has travelled ½ × 3 × 8 = 12 m. A is 12 m ahead. Equal speed does not mean equal position.
Step 3 — Audit 6 s: accumulated areas are equal, so both distances are 48 m. Given the same starting position and direction, B catches A at 6 s. B’s greater final speed does not prove greater distance over the interval.
☷ CHALLENGE — The Journey Sequence
DOK 2 — ApplySequence the Recorded-Interval Analysis
The straight speed–time segment joins (2 s, 4 m/s) and (8 s, 16 m/s). Arrange six linked steps to find the distance over this recorded interval. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Physics Insight — A Snapshot and a Journey
Graph height is a snapshot of speed. Accumulated area describes the journey up to that time. Two objects can have the same speed while one remains ahead.
The Physics: in a fixed positive direction, velocity equals speed, so the speed–time graph also represents velocity–time motion. Area then equals both distance and positive displacement. For motion that changes direction, use a signed velocity graph to determine displacement; a speed graph alone cannot recover direction.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your 10-year-old sibling asks what a speed–time graph says about a car trip. Explain graph height, gradient and area using simple words.
Explain why a flat trace can represent motion and why equal speeds do not always mean equal positions. Type at least three short sentences, or draw a labelled explanation using at least three purposeful strokes. Exact keywords are not required.
Type Your Explanation (≥ 3 sentences)
Draw a speed–time graph, label its axes and show the region representing distance. Add at least three purposeful strokes. This checks effort; compare the physics with the Vault.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — PHYSICS CREST mastery notebook.
📓 PHYSICS CREST Secret Notebook
📈Mission 2.11 — Mastering Speed–Time Graphs
"The Speed Story" 🏎️📈
Gradient = (v₂ − v₁)/(t₂ − t₁) = a.
Straight-segment distance: d = ½(v₁ + v₂)Δt.
Multi-stage distance: d = d₁ + d₂ + … ; average speed for the whole journey = total distance / total elapsed time.
| Read | Meaning | Units / condition |
|---|---|---|
| Graph height | Speed at that time | m/s; no direction information |
| Gradient | Rate of change of speed | m/s²; signed acceleration in this fixed positive direction |
| Area | Distance travelled | m; add every segment |
🌍 OVERVIEW: Speed-Time Graphs
A speed–time graph plots speed on the y-axis against time (t) on the x-axis. From this ONE graph you can read off two critical ideas: slope = rate of change of speed and area = distance. For the fixed-direction, no-reversal examples used here, that slope corresponds to acceleration.
1. SLOPE = Rate of Change of Speed
The slope of a speed–time graph is the rate of change of speed. In the straight-line, fixed-positive-direction, no-reversal motion used in this Mission, it corresponds to the signed acceleration used in the examples. A speed–time graph by itself does not show direction.
- Formula: slope = Δ(speed)/Δt = a (in this model)
- Positive slope → speed increasing; in this fixed-direction model, positive acceleration.
- Negative slope → speed decreasing → deceleration (slowing down); in this fixed-direction model, negative acceleration.
- Zero slope (flat line) → constant speed → zero acceleration (cruising).
- On the same axis scales, a steeper slope has larger acceleration magnitude; a gentler slope has smaller magnitude.
2. AREA = Distance Traveled
The area under the speed-time curve is the distance traveled! (Distance = ∫ speed dt.)
- Rectangle (constant speed): area = speed × time = d
- Triangle (from rest): area = ½ × t × v₂ = d
- Trapezoid (constant acceleration): area = ½(v₁ + v₂) × t = d
Crucial Insight: The trapezoid formula ½(v₁ + v₂)·t is the same as average speed × time! Average speed = (v₁ + v₂)/2, then × t = distance.
3. TRAPEZOIDAL AREA EXTRACTION
For a straight-line speed–time graph (constant acceleration), the area is a trapezoid with the two parallel sides being the initial and final speeds, and the base being the time interval.
- Single segment: d = ½(v₁ + v₂) × t
- Multi-stage journey: compute the area of EACH segment (rectangles, triangles, trapezoids), then ADD them for total distance.
- Example: Stage 1: 0→10s accelerate 0→20 m/s (trapezoid: ½(0+20)×10 = 100 m). Stage 2: 10→20s cruise at 20 m/s (rectangle: 20×10 = 200 m). Stage 3: 20→25s brake 20→0 (triangle: ½×20×5 = 50 m). Total = 100+200+50 = 350 m.
4. INTERCEPT & CATCHING-UP PROBLEMS
When two objects' speed–time graphs are plotted on the same axes:
- Intersection point = when both have the SAME speed (NOT the same position!).
- The object with MORE AREA under its curve has traveled FARTHER.
- Catching-up: If both objects start from the same position and move in the same direction, they are together again when their accumulated areas are equal; once A's accumulated area becomes larger, A has passed B. If they start at different positions, include the initial separation.
- Trap: Two objects at the same speed (intersection) are NOT necessarily at the same position. Position depends on the accumulated AREA, not the current speed.
🚨 THE "CREST" EXAM SECRETS
🔑 EXAM TIP: Slope vs Area
Exams love to confuse slope and area on a speed–time graph. Remember: SLOPE = rate of change of speed (and equals acceleration in this Mission’s fixed-direction model), while AREA = distance. They are different quantities!
- The Trap: Students see "how far" and reach for the slope.
- The Golden Rule: "How far" → AREA. "How fast speed changes" → SLOPE. "What's the speed at time t?" → read the Y-VALUE.
⚠️ COMMON MISTAKE: The "Flat = Stopped" Myth
Students see a flat line and think the object is stopped.
- WRONG! A flat line means CONSTANT SPEED (cruising), not stopped. The object is moving at a steady non-zero speed.
- Only a flat line at speed = 0 means the object is stopped.
- At a constant speed of 20 m/s for 5 s, distance = 20 × 5 = 100 m. The object moved 100 m while its speed trace was flat.
🧠 MEMORY TRICK: "S.A.D. Triangle"
- Slope = Acceleration, Distance = Area.
- Or: "Slope Above, Distance Down below" — slope is the line ABOVE, distance is the area DOWN BELOW the line.
- Another: "SAD face — Slope-Acceleration-Distance" reminds you the three are linked but distinct.
🪁 BONUS FACT: Trapezoid = Average Speed
For a straight speed–time segment, the trapezoid area is average speed × elapsed time. If speed changes at a constant rate from 10 to 30 m/s over 8 s, the average is 20 m/s and the distance is 160 m. For a curved or multi-stage trace, the first and last speeds alone do not determine the average.
✨ Bonus wonder — the missing direction
Two objects can have identical speed–time graphs while travelling in opposite directions. Their distances match, but their displacements differ. A signed velocity–time graph carries the direction information that a speed graph leaves out.
✅ PHYSICS CREST CHECKLIST (memorize!)
- On a speed–time graph: slope = rate of change of speed; area = distance. In this Mission’s fixed-direction model, slope corresponds to acceleration.
- Upward slope = speeding up. Downward slope = slowing down. Flat = constant speed (NOT stopped!).
- Rectangle area = speed × time (constant speed).
- Straight segment from or to rest: triangle area = ½ × elapsed time × non-zero endpoint speed.
- Straight segment: trapezoid area = ½(v₁ + v₂)Δt = average speed × elapsed time.
- Multi-stage journey: ADD the areas of each segment.
- Intersection of two speed–time lines = same SPEED (not same position!).
- Who traveled farther? Object with MORE AREA under its curve.
- Catch-up: for the same starting position and direction, equal accumulated areas mean the same position; a larger area means one has passed the other.
- Check units: slope has units m/s² (acceleration). Area has units m (distance).
— PHYSICS CREST ✨
"Slope Above, Distance Down below."
Mission 2.11 Complete! · All 10 levels cleared · PHYSICS CREST
🏅 Master of Speed–Time Graphs
Speed–Time Graph Interpretation — mastered. Area = distance; slope = rate of change of speed (and corresponds to acceleration in this Mission’s fixed-direction model).