Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
How to use this: Try every question before revealing feedback. The questions are original, but the techniques are built from the current 9702 syllabus and recurring Cambridge-style assessment patterns: derivations, energy bookkeeping, graphs, scaling, machines, vehicles, resistance and unfamiliar contexts.
MCQs · 1–10
Q1 Easywork
A constant horizontal force of $25\,\mathrm N$ moves a box $8.0\,\mathrm m$ horizontally. What work is done by the force?
$W=Fs=(25)(8.0)=200\,\mathrm J$.
Q2 Mediumcomponent
A $50\,\mathrm N$ force acts at $60^\circ$ to the direction of motion while an object moves $6.0\,\mathrm m$. What work does this force do?
$W=Fs\cos60^\circ=(50)(6.0)(0.5)=150\,\mathrm J$.
Q3 Mediumzero work
A student carries a box horizontally at constant height. What is the work done by the box's weight during the horizontal motion?
Weight is vertical and displacement is horizontal, so $\theta=90^\circ$ and $W=Fs\cos90^\circ=0$.
Q4 Mediumnet work
A box is pushed horizontally by $80\,\mathrm N$ while a $30\,\mathrm N$ frictional force opposes the motion. The box moves $5.0\,\mathrm m$. What is the increase in kinetic energy?
Net work $=(80-30)(5.0)=250\,\mathrm J$. Since $W_{\mathrm{net}}=\Delta E_k$, the KE increases by $250\,\mathrm J$.
Q5 EasyGPE
A $4.0\,\mathrm{kg}$ object is raised vertically by $3.0\,\mathrm m$. What is its increase in GPE? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
A $20\,\mathrm{kg}$ object moves $10\,\mathrm m$ up a slope inclined at $30^\circ$ to the horizontal. What is the increase in GPE? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
$\Delta h=10\sin30^\circ=5.0\,\mathrm m$, so $\Delta E_p=(20)(9.8)(5.0)=980\,\mathrm J$.
Q7 EasyKE scaling
The speed of an object is tripled while its mass is unchanged. By what factor does its kinetic energy change?
$E_k\propto v^2$. Tripling $v$ gives $3^2=9$ times the KE.
Q8 Mediumspeed vs velocity
A car of fixed mass changes velocity from $+15\,\mathrm{m\,s^{-1}}$ to $-15\,\mathrm{m\,s^{-1}}$. What is the change in its kinetic energy?
KE depends on speed squared. The speed is $15\,\mathrm{m\,s^{-1}}$ before and after, so the KE is unchanged.
Q9 Mediumwork–energy
A $1200\,\mathrm{kg}$ car accelerates from rest to $20\,\mathrm{m\,s^{-1}}$. What net work is done on the car?
With the same braking force, a car stops in $12\,\mathrm m$ from $10\,\mathrm{m\,s^{-1}}$. What stopping distance is expected from $25\,\mathrm{m\,s^{-1}}$?
$d\propto v^2$. The speed factor is $25/10=2.5$, so $d=12(2.5)^2=75\,\mathrm m$.
P2
MCQs · 11–20
Q11 Mediumconservation
A $0.50\,\mathrm{kg}$ object falls from rest through $8.0\,\mathrm m$. Air resistance is negligible. What is its kinetic energy after the fall? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
Loss of GPE $=mgh=(0.50)(9.8)(8.0)=39.2\,\mathrm J$. With no resistance, this becomes KE.
Q12 Mediumdissipation
A $2.0\,\mathrm{kg}$ object falls from rest through $6.0\,\mathrm m$. During the fall, $30\,\mathrm J$ is dissipated by air resistance. What is its final kinetic energy? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
GPE lost $=(2.0)(9.8)(6.0)=117.6\,\mathrm J$. Final KE $=117.6-30=87.6\,\mathrm J\approx88\,\mathrm J$.
Q13 Mediumconstant speed
An $800\,\mathrm{kg}$ car descends a hill at constant speed and loses $25\,\mathrm m$ of vertical height. What happens to its kinetic energy, and approximately how much energy is dissipated? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
Constant speed means KE is unchanged. GPE lost $=(800)(9.8)(25)=196\,000\,\mathrm J$, so this energy is transferred elsewhere, e.g. by braking/resistance.
Q14 Easyefficiency
A machine receives $800\,\mathrm J$ and provides $600\,\mathrm J$ of useful output. What is its efficiency?
$\eta=600/800=0.75=75\%$.
Q15 Mediumpower efficiency
A motor provides $9.0\,\mathrm{kW}$ of useful mechanical power and is $60\%$ efficient. What input power is required?
A force of $400\,\mathrm N$ acts at $60^\circ$ to the velocity of an object moving at $5.0\,\mathrm{m\,s^{-1}}$. What instantaneous power is delivered by this force?
Use the component parallel to the velocity: $P=Fv\cos60^\circ=(400)(5.0)(0.5)=1000\,\mathrm W$.
Q19 Hardconstant power
An engine delivers constant mechanical power. Ignoring resistance, what happens to the driving force as the speed increases from $20$ to $30\,\mathrm{m\,s^{-1}}$?
$F=P/v$. At constant $P$, $F_2/F_1=v_1/v_2=20/30=2/3$.
Q20 Mediumlifting power
A crane lifts a $500\,\mathrm{kg}$ load vertically at constant speed $0.80\,\mathrm{m\,s^{-1}}$. What useful power does the crane deliver? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
Water flows at $50\,\mathrm{kg\,s^{-1}}$ through a vertical drop of $12\,\mathrm m$. A turbine converts $70\%$ of the available GPE power to useful output. What is the useful power? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
$P_{\mathrm{avail}}=\dot{m}gh=(50)(9.8)(12)=5880\,\mathrm W$. Useful power $=0.70(5880)=4116\,\mathrm W\approx4.12\,\mathrm{kW}$.
Q22 Mediumenergy–time graph
The energy transferred by a motor increases from $20\,\mathrm{kJ}$ to $50\,\mathrm{kJ}$ in $5.0\,\mathrm s$. What is the average power during this interval?
Power is the gradient of an energy–time graph: $P=\Delta E/\Delta t=(30\,000)/5.0=6000\,\mathrm W=6.0\,\mathrm{kW}$.
Q23 Mediumpower–time area
A heater operates at a constant power of $2.0\,\mathrm{kW}$ for $6.0\,\mathrm s$. On a power–time graph, what energy is represented by the area under the graph?
Area $=Pt=(2.0\,\mathrm{kW})(6.0\,\mathrm s)=12\,\mathrm{kJ}$.
Q24 Hardwork in stages
A trolley moves in the direction of the applied force. A constant 6.0 N force acts for the first 2.0 m and then a constant 12 N force acts for the next 3.0 m. What total work is done by the applied force?
$W=(6.0)(2.0)+(12)(3.0)=48\,\mathrm J$. Each stage uses $W=Fs$ because the force is constant and parallel to the displacement.
Q25 Mediumgraph shape
For a fixed mass, which description matches a graph of kinetic energy $E_k$ against speed $v$?
$E_k=\frac12mv^2$, so KE is proportional to $v^2$: a parabola through the origin.
Q26 MediumGPE graph
For a fixed mass in a uniform gravitational field, what is the gradient of a graph of gravitational potential energy $E_p$ against vertical height $h$?
$E_p=mgh$, so gradient $\Delta E_p/\Delta h=mg$.
Q27 Hardenergy bookkeeping
An object initially has $100\,\mathrm J$ of KE. It rises so that its GPE increases by $60\,\mathrm J$, and $10\,\mathrm J$ is dissipated. What is its final KE?
$100=E_{k,f}+60+10$, so $E_{k,f}=30\,\mathrm J$.
Q28 Mediumaverage resistance
$400\,\mathrm J$ of mechanical energy is dissipated while an object travels $25\,\mathrm m$. What is the average resistive force?
A ball is projected vertically upward at $14\,\mathrm{m\,s^{-1}}$. Ignore air resistance and take the launch point as zero GPE. At what height are its KE and GPE equal? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
Initial total energy is $\frac12mu^2$. When KE = GPE, each is half the total: $mgh=\frac14mu^2$. Thus $h=u^2/(4g)=196/39.2=5.0\,\mathrm m$.
Q30 Mediumefficiency rearrangement
A device is $65\%$ efficient and produces $2.6\,\mathrm{MJ}$ of useful output energy. What total input energy is required?
Two smooth ramps raise the same $10\,\mathrm{kg}$ load through the same vertical height of $2.0\,\mathrm m$. One ramp is twice as long as the other. What is the minimum work needed against gravity on each ramp? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
For smooth ramps with the same start and finish heights, the GPE increase is the same: $mgh=(10)(9.8)(2.0)=196\,\mathrm J$.
Q32 Hardpower + efficiency
A hoist lifts a $240\,\mathrm{kg}$ load vertically at a constant speed of $0.50\,\mathrm{m\,s^{-1}}$. The hoist is $70\%$ efficient. What input power is required? Take $g=9.8\,\mathrm{m\,s^{-2}}$.
Useful power $=mgv=(240)(9.8)(0.50)=1.176\,\mathrm{kW}$. Input power $=1.176/0.70=1.68\,\mathrm{kW}$.
S1
Structured Questions · 1–4
Cambridge habit: later parts may depend on earlier answers. Keep full working, units and signs. These are original questions designed to train the recurring techniques, not copied past-paper questions.
Structured 1 10 marksGPE derivation + energy
A car of mass $900\,\mathrm{kg}$ travels $150\,\mathrm m$ up a road inclined at $6.0^\circ$ to the horizontal. It starts from rest and reaches $18\,\mathrm{m\,s^{-1}}$. The average resistive force is $250\,\mathrm N$. Take $g=9.81\,\mathrm{m\,s^{-2}}$.
(a) Starting from $W=Fs$, derive $\Delta E_p=mg\Delta h$. 2
(b) Calculate the increase in GPE of the car. 2
(c) Calculate the increase in kinetic energy. 2
(d) Calculate the work done against resistance. 1
(e) Determine the total work that must be supplied by the engine. 2
(f) State one reason the actual fuel-energy input would be greater than your answer to (e). 1
(a) For vertical lifting at constant speed, force against gravity $F=mg$. Work $W=Fs=(mg)(\Delta h)$. This work increases GPE, so $\Delta E_p=mg\Delta h$.
(f) The engine is not $100\%$ efficient; additional energy is dissipated internally as heating/sound.
Structured 2 10 marksKE derivation + braking
A $1100\,\mathrm{kg}$ car travels at $24\,\mathrm{m\,s^{-1}}$ and is brought to rest by an average braking force of $7.2\,\mathrm{kN}$.
(a) Starting with $W=Fs$, $F=ma$ and a constant-acceleration equation, derive $E_k=\frac12mv^2$. 3
(b) Calculate the car's initial kinetic energy. 2
(c) Calculate the braking distance. 2
(d) The same car is instead travelling at $36\,\mathrm{m\,s^{-1}}$ and the same average braking force acts. Without repeating the full calculation, determine the new braking distance. 2
(e) Explain the scaling used in (d). 1
(a) $W=Fs=mas$. From $v^2=u^2+2as$, $as=(v^2-u^2)/2$. Therefore $W=\frac12m(v^2-u^2)=\Delta E_k$. For an object accelerated from rest, $E_k=\frac12mv^2$.
A cyclist and bicycle have total mass $70\,\mathrm{kg}$. They travel $600\,\mathrm m$ up a road inclined at $4.0^\circ$ to the horizontal at a constant speed of $8.0\,\mathrm{m\,s^{-1}}$. The average resistive force is $45\,\mathrm N$. Take $g=9.81\,\mathrm{m\,s^{-2}}$.
(a) Determine the time for the climb. 1
(b) Calculate the gain in GPE. 2
(c) Calculate the work done against resistance. 1
(d) Determine the cyclist's useful mechanical power during the climb. 3
(e) The cyclist's body converts metabolic energy to useful mechanical work with an efficiency of $25\%$. Estimate the metabolic input power. 2
(f) Explain why the kinetic energy does not change. 1
(d) $0$–$4\,\mathrm s$; it has the steepest gradient on the energy–time graph.
(e) $90\,\mathrm{kJ}$.
(f) Energy transferred (or work done).
S2
Structured Questions · 5–8
Structured 5 8 markshydroelectric efficiency
Water descends from a reservoir through a vertical height of $25\,\mathrm m$ at a mass flow rate of $120\,\mathrm{kg\,s^{-1}}$. The turbine-generator system is $78\%$ efficient. Take $g=9.81\,\mathrm{m\,s^{-2}}$.
(a) Calculate the rate at which the water loses GPE. 3
(b) Calculate the useful electrical output power. 2
(c) Determine the energy dissipated in $60\,\mathrm s$. 2
(d) State one physical process that could account for this dissipated energy. 1
(c) Dissipated power $=(1-0.78)(29.43)=6.47\,\mathrm{kW}$. In $60\,\mathrm s$, $E=6.47\times10^3(60)=3.88\times10^5\,\mathrm J$.
(d) Examples: turbulence, friction in bearings, heating, sound.
Structured 6 8 marksrebound energy
A $0.120\,\mathrm{kg}$ ball is released from rest $3.0\,\mathrm m$ above a rigid floor. Air resistance is negligible before impact. It rebounds to a maximum height of $1.8\,\mathrm m$. Take $g=9.81\,\mathrm{m\,s^{-2}}$.
(a) Calculate the kinetic energy immediately before impact. 2
(b) Calculate the kinetic energy immediately after the bounce. 2
(c) Calculate the energy dissipated during the collision with the floor. 2
(d) Determine the percentage of the pre-impact kinetic energy retained after the bounce. 2
(d) Retained fraction $=2.12/3.53=0.600$, so $60.0\%$.
Structured 7 10 marksconstant power vehicle
A car of mass $1500\,\mathrm{kg}$ has a mechanical engine output power of $72\,\mathrm{kW}$. At $18\,\mathrm{m\,s^{-1}}$ the total resistive force is $1.2\,\mathrm{kN}$. At $30\,\mathrm{m\,s^{-1}}$ the total resistive force is $2.0\,\mathrm{kN}$.
(a) Derive $P=Fv$ from the definition of power. 2
(b) Calculate the driving force at $18\,\mathrm{m\,s^{-1}}$. 2
(c) Calculate the acceleration at $18\,\mathrm{m\,s^{-1}}$. 2
(d) Calculate the acceleration at $30\,\mathrm{m\,s^{-1}}$. 2
(e) Explain why constant engine power does not give constant acceleration. 2
(a) $P=W/t=Fs/t=F(s/t)=Fv$ for force parallel to the motion.
(e) At fixed power, driving force falls as speed rises because $F=P/v$. Here the resistive force also increases, so resultant force and acceleration decrease.
Structured 8 8 markscrane + efficiency
A crane lifts a $1600\,\mathrm{kg}$ load vertically at a constant speed of $0.45\,\mathrm{m\,s^{-1}}$. The motor is $32\%$ efficient. Take $g=9.81\,\mathrm{m\,s^{-2}}$.
(a) Calculate the tension in the lifting cable. 1
(b) Calculate the useful mechanical output power. 2
(c) Calculate the motor input power. 2
(d) The load is lifted for $25\,\mathrm s$. Calculate the vertical distance moved. 1
(e) Calculate the total energy supplied to the motor during these $25\,\mathrm s$. 2
(a) Constant speed gives zero resultant force, so $T=mg=(1600)(9.81)=1.57\times10^4\,\mathrm N$.