Skip to lesson
1

Topic 5 · Work, Energy & Power

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

What Cambridge is really testing
Topic 5 is an energy-accounting topic. You must move confidently between force, displacement, energy, time and speed. The strongest answers identify what energy enters, what useful energy changes, and where any remaining energy goes.

5.1 · Work

  • WorkAn energy transfer by a force acting through displacement.
  • The relevant component is along the displacement.
  • Energy accounting begins by deciding which objects and stores belong inside your system.
Definition
Work done by a force is the product of the force and the displacement in the direction of that force. $$\boxed{W=Fs_{\parallel}=Fs\cos\theta}$$ Here, $\theta$ is the angle between the force and the displacement. Work is a scalar and is measured in joules: $$1\,\mathrm J=1\,\mathrm{N\,m}.$$
F displacement s θ F cos θ
Technique: do not multiply by the whole force automatically. Ask: “Which component of the force acts along the displacement?”
  • Along the motion: positive work.
  • Opposite the motion: negative work.
  • Perpendicular to the motion: zero work.
Work-question method
  1. Identify the force whose work is being asked for.
  2. Identify the displacement of the point on which that force acts.
  3. Find the angle between that force and displacement, or resolve the force along the displacement.
  4. Use $W=Fs\cos\theta$ and keep the sign meaningful.
Exam traps
Trap 1: path length is not always the relevant displacement for a particular force. For gravity near Earth, the energy change depends on vertical height change.
Trap 2: a force can be large and still do zero work if it is perpendicular to the displacement.
Trap 3: “work done against resistance” is normally quoted as a positive energy dissipated; “work done by the resistive force” is negative.
Quick Check 1
A $40\,\mathrm N$ force acts at $60^\circ$ to a horizontal displacement of $3.0\,\mathrm m$. Find the work done by the force.
$W=Fs\cos\theta=(40)(3.0)\cos60^\circ=60\,\mathrm J$.
A force is perpendicular to displacement. What work does that force do?

Your turn · Find work by a 30 N force parallel to a 4.0 m displacement.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

2

5.2 · Gravitational Potential Energy

Required derivation
Near Earth, the gravitational field is treated as uniform, so the weight is $F=mg$. If an object is raised vertically through $\Delta h$: $$W=Fs=(mg)(\Delta h).$$ The work done against gravity becomes the increase in gravitational potential energy: $$\boxed{\Delta E_p=mg\Delta h}.$$
Δh path length s GPE uses vertical height change
Geometry trap: on an incline, $mg\Delta h$ uses the vertical rise, not the distance travelled along the slope. If the slope length is $s$ and angle is $\alpha$, $$\Delta h=s\sin\alpha.$$
Reference-level rule
The absolute value of gravitational potential energy depends on your chosen zero level. Cambridge usually cares about the change: $\Delta E_p=mg(h_f-h_i)$. If the object moves down, $\Delta h$ is negative and GPE decreases.
Geometry first, energy second
In pendulum, hill, ramp or cable questions, first turn the diagram into a vertical height change. Only then use $mg\Delta h$.
Quick Check 2
A $12\,\mathrm{kg}$ object moves $5.0\,\mathrm m$ up a smooth slope at $30^\circ$ to the horizontal. Find its increase in GPE. Take $g=9.81\,\mathrm{m\,s^{-2}}$.
$\Delta h=5.0\sin30^\circ=2.5\,\mathrm m$. Therefore $\Delta E_p=(12)(9.81)(2.5)=2.94\times10^2\,\mathrm J$.
3

5.2 · Kinetic Energy

Required derivation from equations of motion
For a constant resultant force $F=ma$ acting through displacement $s$: $$W=Fs=mas.$$ From kinematics, $$v^2=u^2+2as\quad\Rightarrow\quad as=\frac{v^2-u^2}{2}.$$ Therefore $$W=m\left(\frac{v^2-u^2}{2}\right)=\frac12mv^2-\frac12mu^2.$$ So the net work changes kinetic energy: $$\boxed{W_{\mathrm{net}}=\Delta E_k},\qquad \boxed{E_k=\frac12mv^2}.$$
v 2v KE = E KE = 4E
$$E_k\propto m,\qquad E_k\propto v^2.$$
  • Double the mass → double the KE.
  • Double the speed → four times the KE.
  • Triple the speed → nine times the KE.
Braking-distance technique
If the same average braking force stops the same vehicle, $$F_{\mathrm{brake}}d=E_{k,\mathrm{initial}}-E_{k,\mathrm{final}}=\frac12mv^2.$$ Therefore $$\boxed{d\propto v^2}.$$ A speed factor of $3$ gives a braking-distance factor of $3^2=9$.
Direction trap
Kinetic energy depends on speed, not velocity direction. A car moving at $+20\,\mathrm{m\,s^{-1}}$ and one moving at $-20\,\mathrm{m\,s^{-1}}$ have the same KE if their masses are equal.
Quick Check 3
A car needs $18\,\mathrm m$ of braking distance from $12\,\mathrm{m\,s^{-1}}$ under a fixed braking force. Estimate the braking distance from $24\,\mathrm{m\,s^{-1}}$.
The speed doubles, so the KE and braking distance become $2^2=4$ times larger: $d=4(18)=72\,\mathrm m$.
4

5.1 · Conservation of Energy

  • Use force–displacement area for variable force and Fd cos θ for a constant force.
  • Net work changes kinetic energy.
  • PowerA transfer rate; it is not the same as an amount of energy.
Principle
Energy cannot be created or destroyed. It can be transferred between stores or to the surroundings. For a chosen system: $$\boxed{E_{\mathrm{initial}}+E_{\mathrm{supplied}}=E_{\mathrm{final}}+E_{\mathrm{dissipated}}}.$$
The energy-accounting method
  1. Choose the initial and final states.
  2. Write the KE and GPE at each state.
  3. Add any energy supplied by an engine, motor or external force.
  4. Add any energy dissipated by friction or drag.
  5. Solve the energy equation. Do not invent a “lost energy” term unless a non-conservative process is present.
Energy input Useful energy change Dissipated energy
A very common structured-question chain is: $$\text{initial KE}\to\text{GPE gain}\to\text{dissipated energy}\to\text{average resistive force}.$$ If $E_{\mathrm{diss}}$ is dissipated over distance $s$, $$\boxed{F_{\mathrm{resist,avg}}=\frac{E_{\mathrm{diss}}}{s}}.$$
Multi-stage questions
Treat each stage as its own energy statement. The final energy of one stage becomes the initial energy of the next. This is especially useful for a vehicle climbing, a ball rebounding, or a system that first accelerates and then moves at constant speed.
Syllabus boundary
Topic 5 can use friction or air resistance as an energy-loss term. Detailed terminal-velocity dynamics belongs with motion under resistive forces, not as a separate Topic 5 formula set.
Quick Check 4
A $2.0\,\mathrm{kg}$ object loses $160\,\mathrm J$ of GPE while its KE increases by $110\,\mathrm J$. How much energy is dissipated?
$E_{\mathrm{diss}}=160-110=50\,\mathrm J$.
5

5.1 · Power

Definition
Power is the work done per unit time, or equivalently the rate of energy transfer: $$\boxed{P=\frac{W}{t}}.$$ SI unit: watt, where $1\,\mathrm W=1\,\mathrm{J\,s^{-1}}$.
Required derivation of $P=Fv$
For a force component $F$ acting in the direction of motion: $$P=\frac{W}{t}=\frac{Fs}{t}=F\left(\frac{s}{t}\right).$$ Since $s/t=v$ for the interval considered, $$\boxed{P=Fv}.$$ If the force is at an angle to the velocity, use the component parallel to the motion: $$P=(F\cos\theta)v.$$
Power selector
Question gives...Fast route
work or energy and time$P=W/t$ or $P=\Delta E/t$
driving/resistive force and speed$P=Fv$
steady vertical lifting$P=mgv$
mass flow rate $\dot{m}$ through height $\Delta h$$P_{\mathrm{GPE}}=\dot{m} g\Delta h$
Constant-power reasoning
If an engine delivers approximately constant mechanical power, $$F_{\mathrm{drive}}=\frac{P}{v}.$$ As speed increases, the available driving force decreases. If resistive forces also increase with speed, the resultant force and acceleration fall even more. Constant power does not mean constant acceleration.
Power is not energy
Energy tells you how much has been transferred. Power tells you how fast it is transferred. Two motors can do the same work but have different powers if they take different times.
Quick Check 5
A vehicle moves at $20\,\mathrm{m\,s^{-1}}$ against a total resistive force of $900\,\mathrm N$. Find the useful mechanical power needed to maintain constant speed.
$P=Fv=(900)(20)=1.8\times10^4\,\mathrm W=18\,\mathrm{kW}$.
6

5.1 · Efficiency

Efficiency
$$\boxed{\eta=\frac{\text{useful energy output}}{\text{total energy input}}}$$ The same ratio may be written using powers when the input and output are compared over the same time: $$\boxed{\eta=\frac{P_{\mathrm{useful}}}{P_{\mathrm{input}}}}.$$ As a percentage, multiply by $100\%$.
Rearrangement triangle — think before substituting
$E_{\mathrm{useful}}=\eta E_{\mathrm{in}}$ $E_{\mathrm{in}}=E_{\mathrm{useful}}/\eta$ $P_{\mathrm{useful}}=\eta P_{\mathrm{in}}$ $P_{\mathrm{in}}=P_{\mathrm{useful}}/\eta$
Convert a percentage to a decimal before calculation: $72\%=0.72$.
Δh turbine mass flow rate ṁ
For water falling through height $\Delta h$ at mass flow rate $\dot{m}$: $$P_{\mathrm{available}}=\dot{m} g\Delta h.$$ If the turbine-generator efficiency is $\eta$: $$P_{\mathrm{useful}}=\eta\dot{m} g\Delta h.$$ This is a powerful route for pump and hydroelectric questions.
Efficiency traps
Input is the denominator. Also, $75\%$ means $0.75$, not $75$. In an ideal model efficiency may be $100\%$; real devices are normally below $100\%$.
Quick Check 6
A motor provides $12\,\mathrm{kW}$ of useful mechanical power at $80\%$ efficiency. Find its input power.
$P_{\mathrm{in}}=P_{\mathrm{useful}}/\eta=12/0.80=15\,\mathrm{kW}$.
7

Topic 5 · Graph & Exam Toolbox

Energy–time graph

A tangent gives the instantaneous rate of changeA tangent gives the instantaneous rate of changeEttangent at one pointTangent gradient = instantaneous power. $$\boxed{P=\frac{\Delta E}{\Delta t}}$$ Steeper energy–time graph → greater power.

Power–time graph

area = energy t P $$\boxed{\Delta E=\text{area under a }P\text{–}t\text{ graph}}$$
Force–displacement extension
From $W=Fs$, a rectangular section on an $F$–$s$ graph has area $F\Delta s$, which is work. For a graph made from simple sections, total work is the sum of the signed areas.
Use this as a representation technique when the question supplies a force–displacement graph; the core syllabus formula remains work = force × displacement in the direction of the force.
Master equation sheet
ConceptEquationExam cue
Work$W=Fs\cos\theta$force + displacement + angle/component
GPE change$\Delta E_p=mg\Delta h$vertical height change
Kinetic energy$E_k=\frac12mv^2$speed squared
Net work$W_{\mathrm{net}}=\Delta E_k$resultant work changes KE
Power$P=W/t$energy/work per time
Power at speed$P=Fv$force parallel to velocity
Efficiency$\eta=E_{\mathrm{useful}}/E_{\mathrm{in}}=P_{\mathrm{useful}}/P_{\mathrm{in}}$useful ÷ input
Command-word technique
Derive: start from a permitted relationship and show every algebraic link.
Show that: substitute clearly and reach the supplied value without circular reasoning.
Explain: name the energy transfer and connect it to the physical cause.
Determine/Calculate: select the model, substitute with units, and give a sensible final unit.
Suggest: give a physically plausible reason consistent with the information provided.
Final trap checklist
  • Use vertical height in $mg\Delta h$, not ramp length.
  • Use speed in $\frac12mv^2$; reversing direction does not make KE negative.
  • Do not assume all lost GPE becomes KE when resistance is present.
  • Do not confuse useful output with total input in efficiency.
  • Convert kJ→J and kW→W when needed.
  • For $P=Fv$, use the force component parallel to the motion.
Keep Topic 5 clean
Gas-expansion work, elastic-energy formulas and rotational work/power formulas are not current Topic 5 requirements. They are deliberately excluded from this Topic 5 core sheet. Historical questions using those ideas are evidence of older/cross-topic technique, not permission to expand the present syllabus boundary.