Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
How to use this section
MCQs (1–20): Click an option to check your answer. Every question has an SVG figure. FRQs (1–5): Try on paper first, then click "Show worked solution" for the rubric.
Multiple Choice Questions
Q1. Medium4.1
A force of $15\,\text{N}$ is applied at the end of a $0.80\,\text{m}$ spanner at $60^{\circ}$ to the spanner. What is the moment about the nut?
A. $6.0\,\text{Nm}$
B. $10.4\,\text{Nm}$
C. $12.0\,\text{Nm}$
D. $15.0\,\text{Nm}$
$d_{\perp} = 0.80 \times \sin 60^{\circ} = 0.693\,\text{m}$. Moment $= 15 \times 0.693 = 10.4\,\text{Nm}$. Answer: B.
Q2. Easy4.3
A block of mass $240\,\text{g}$ has dimensions $4\,\text{cm} \times 5\,\text{cm} \times 6\,\text{cm}$. What is its density?
What is the pressure at a depth of $30\,\text{m}$ below the surface of a lake? (Density of water = $1000\,\text{kg/m}^3$, atmospheric pressure = $101\,\text{kPa}$, $g = 9.8\,\text{m/s}^2$)
A. $395\,\text{kPa}$
B. $101\,\text{kPa}$
C. $294\,\text{kPa}$
D. $496\,\text{kPa}$
Total pressure = atmospheric + hydrostatic = $101{,}000 + (30)(1000)(9.8) = 101{,}000 + 294{,}000 = 395{,}000\,\text{Pa} = 395\,\text{kPa}$. Answer: A.
Q4. Medium4.1 / 4.2
A uniform metre rule is balanced at the $30\,\text{cm}$ mark. A mass of $50\,\text{g}$ hangs at the $0\,\text{cm}$ mark. What is the mass of the rule? ($g = 9.8\,\text{m/s}^2$)
A. $50\,\text{g}$
B. $120\,\text{g}$
C. $75\,\text{g}$
D. $150\,\text{g}$
Take moments about the pivot. ACW: $50g \times 0.30$. CW: $Mg \times 0.20$ (CoG at 50 cm, pivot at 30 cm, distance = 20 cm = 0.20 m). $50 \times 0.30 = M \times 0.20$. $M = 75\,\text{g}$. Answer: C.
Q5. Medium4.3
An object of volume $0.002\,\text{m}^3$ is fully submerged in water ($\rho = 1000\,\text{kg/m}^3$). What is the upthrust on the object? ($g = 9.8\,\text{m/s}^2$)
A. $9.8\,\text{N}$
B. $19.6\,\text{N}$
C. $98\,\text{N}$
D. $196\,\text{N}$
Upthrust = weight of displaced fluid $= V\rho g = 0.002 \times 1000 \times 9.8 = 19.6\,\text{N}$. Answer: B.
Q6. Easy4.1
A couple consists of two forces of $12\,\text{N}$ each, acting in opposite directions with a perpendicular separation of $0.5\,\text{m}$. What is the torque of the couple?
A. $3.0\,\text{Nm}$
B. $12\,\text{Nm}$
C. $24\,\text{Nm}$
D. $6.0\,\text{Nm}$
Torque of couple $= F \times s = 12 \times 0.5 = 6.0\,\text{Nm}$. Answer: D. Note: the torque is the same about any point.
Q7. Hard4.3
A U-tube contains mercury ($\rho = 13{,}600\,\text{kg/m}^3$). The mercury level on one side is $3\,\text{cm}$ higher than the other. What pressure difference does this represent? ($g = 9.8\,\text{m/s}^2$)
A. $4000\,\text{Pa}$
B. $400\,\text{Pa}$
C. $40{,}000\,\text{Pa}$
D. $400{,}000\,\text{Pa}$
$\Delta P = h\rho g = 0.03 \times 13{,}600 \times 9.8 = 3998 \approx 4000\,\text{Pa}$. Answer: A.
Q8. Medium4.2
For a body to be in complete equilibrium, which two conditions must be satisfied?
A. Zero velocity and zero acceleration.
B. Zero net force and zero velocity.
C. Zero net force and zero net moment.
D. Zero net moment and zero velocity.
Complete equilibrium requires translational equilibrium ($\sum F = 0$) AND rotational equilibrium ($\sum \tau = 0$). Answer: C.
Q9. Easy4.1
Where does the weight of a uniform object act?
A. At the top of the object.
B. At the geometric centre of the object.
C. At the bottom of the object.
D. At whichever point the object is suspended from.
For a uniform object, the centre of gravity is at the geometric centre. Weight acts through this point. Answer: B.
Q10. Hard4.3
An object of density $600\,\text{kg/m}^3$ and volume $0.01\,\text{m}^3$ floats in water ($\rho = 1000\,\text{kg/m}^3$). What fraction of its volume is submerged?
Two coplanar forces of $5.0\,\text{N}$ east and $12.0\,\text{N}$ north act at a point. A third force keeps the point in equilibrium. Which statement describes the third force?
A. $13\,\text{N}$ south-west, opposite the resultant of the shown forces.
B. $17\,\text{N}$ north-east.
C. $7.0\,\text{N}$ south.
D. $13\,\text{N}$ north-east.
The two shown forces have resultant $\sqrt{5^2+12^2}=13\,\text{N}$ north-east. For equilibrium, the third force must be equal and opposite: $13\,\text{N}$ south-west. Answer: A.
Q12. Easy4.3
Pressure is defined as:
A. Force multiplied by area.
B. Area per unit force.
C. Force per unit area, acting perpendicular to the surface.
D. Force per unit volume.
$P = F/A$ where $F$ is perpendicular (normal) to the surface. Answer: C.
Q13. Hard4.1 / 4.2
A uniform rod of weight $20\,\text{N}$ and length $1.2\,\text{m}$ is hinged at one end and held horizontally by a string at the other end. What is the tension in the string?
A. $5\,\text{N}$
B. $10\,\text{N}$
C. $20\,\text{N}$
D. $40\,\text{N}$
Take moments about the hinge. CW: $W \times 0.60$ (CoG at centre, 0.60 m from hinge). ACW: $T \times 1.2$. $20 \times 0.60 = T \times 1.2$. $T = 10\,\text{N}$. Answer: B.
Q14. Medium4.3
What causes upthrust on an object submerged in a fluid?
A. The object's weight pulling it down.
B. The fluid pushing sideways on the object.
C. The object displaces air which pushes back.
D. Pressure increases with depth, so the upward force on the bottom is greater than the downward force on the top.
Upthrust exists because pressure increases with depth ($P = h\rho g$). The bottom of the object is at greater depth, so the upward force on it is larger than the downward force on the top. The net upward force is upthrust. Answer: D.
Q15. Easy4.3
Which has the greater density: $1\,\text{kg}$ of iron or $10\,\text{kg}$ of iron?
A. Both have the same density.
B. $1\,\text{kg}$ of iron.
C. $10\,\text{kg}$ of iron.
D. Cannot determine without knowing the volume.
Density is a material property ($\rho = m/V$). Both samples are iron, so both have the same density ($\approx 7800\,\text{kg/m}^3$). The $10\,\text{kg}$ sample has 10× the mass AND 10× the volume. Answer: A.
Q16. Medium4.1
A couple produces which type of motion?
A. Translation only (linear motion).
B. Both translation and rotation.
C. Rotation only (no translation).
D. No motion at all.
A couple has zero net force (forces are equal and opposite), so no translation. But the forces don't act along the same line, so they produce a net torque — rotation only. Answer: C.
Q17. Hard4.3
Equal masses of two liquids with densities $\rho$ and $2\rho$ are mixed. Assuming no volume change, what is the density of the mixture?
A. $1.5\rho$
B. $\frac{4}{3}\rho$
C. $\frac{3}{4}\rho$
D. $2\rho$
Total mass $= 2m$. Total volume $= m/\rho + m/(2\rho) = 3m/(2\rho)$. $\rho_{mix} = 2m / (3m/(2\rho)) = 4\rho/3 = \frac{4}{3}\rho$. Answer: B.
Q18. Medium4.3
A mercury barometer shows a column height of $76\,\text{cm}$. What is the atmospheric pressure? ($\rho_{Hg} = 13{,}600\,\text{kg/m}^3$, $g = 9.8\,\text{m/s}^2$)
A. $50.5\,\text{kPa}$
B. $136\,\text{kPa}$
C. $1010\,\text{kPa}$
D. $101\,\text{kPa}$
$P = h\rho g = 0.76 \times 13{,}600 \times 9.8 = 101{,}293 \approx 101\,\text{kPa}$. Answer: D. This is standard atmospheric pressure (1 atm).
Q19. Easy4.2
The principle of moments states that for equilibrium:
A. Sum of clockwise moments equals sum of anticlockwise moments.
B. All forces must be zero.
C. All moments must be clockwise.
D. The pivot must be at the centre of the object.
Principle of moments: $\sum \tau_{clockwise} = \sum \tau_{anticlockwise}$ about any point. Answer: A. (This applies to any pivot point, not just the centre.)
Q20. Hard4.3
A block of density $800\,\text{kg/m}^3$ floats in water ($\rho = 1000\,\text{kg/m}^3$). A $2\,\text{kg}$ mass is placed on top. The block just fully submerges. What is the volume of the block? ($g = 9.8\,\text{m/s}^2$)
A. $0.005\,\text{m}^3$
B. $0.020\,\text{m}^3$
C. $0.010\,\text{m}^3$
D. $0.050\,\text{m}^3$
When fully submerged: upthrust $= V \times 1000 \times 9.8$. Weight of block + mass $= (800V \times 9.8) + (2 \times 9.8)$. Equilibrium: $9800V = 7840V + 19.6$. $1960V = 19.6$. $V = 0.010\,\text{m}^3$. Answer: C.
Free Response Questions
FRQ 1. 10 points4.1 / 4.2
A non-uniform horizontal beam of length $3.0\,\text{m}$ and weight $80\,\text{N}$ is supported at its ends A and B. A $20\,\text{N}$ load acts $1.0\,\text{m}$ from A. The upward reaction at B is $35\,\text{N}$.
(a)2 pts Calculate the upward reaction at A.
(b)3 pts Use moments about A to determine the position of the beam's centre of gravity measured from A.
(c)2 pts The $20\,\text{N}$ load is moved to $2.5\,\text{m}$ from A. Calculate the new reaction at B.
(d)1 pt Calculate the corresponding reaction at A.
(e)2 pts Explain why the reaction at B increases when the load is moved farther from A.
(a) (2 pts): Vertical equilibrium gives $R_A+35=80+20$, so $R_A=65\,\text{N}$. 1 pt: force equilibrium. 1 pt: correct reaction with unit.
(b) (3 pts): Take moments about A: $35(3.0)=80x+20(1.0)$. Hence $105=80x+20$, so $x=1.0625\,\text{m}\approx1.06\,\text{m}$ from A. 1 pt: correct moment equation. 1 pt: correct substitution. 1 pt: correct position.
(c) (2 pts): With the load at $2.5\,\text{m}$, $R_B(3.0)=80(1.0625)+20(2.5)=135$. Thus $R_B=45.0\,\text{N}$. 1 pt: moment equation. 1 pt: correct reaction.
(d) (1 pt): $R_A=100-45=55\,\text{N}$.
(e) (2 pts): Moving the load farther from A increases its clockwise moment about A. To maintain zero resultant moment, the upward force at B must produce a larger anticlockwise moment, so $R_B$ increases. 1 pt: load moment increases. 1 pt: balancing reaction moment must increase.
FRQ 2. 8 points4.3
A cylindrical block of cross-sectional area $0.02\,\text{m}^2$ and height $0.30\,\text{m}$ floats in water ($\rho_w = 1000\,\text{kg/m}^3$). The density of the block is $600\,\text{kg/m}^3$. Take $g = 9.8\,\text{m/s}^2$.
(a)2 pts Calculate the mass of the block.
(b)2 pts Calculate the volume submerged when floating.
(c)2 pts Calculate the depth of the block below the water surface.
(d)2 pts Calculate the upthrust when the block is fully pushed underwater.
(c) (2 pts): $h_{sub} = V_{sub}/A = 0.0036/0.02 = 0.18\,\text{m}$ (18 cm submerged out of 30 cm). 1 pt: method. 1 pt: correct depth.
(d) (2 pts): Fully submerged: upthrust $= V_{total}\rho_w g = 0.006 \times 1000 \times 9.8 = 58.8\,\text{N}$. (Weight is only $3.6 \times 9.8 = 35.3\,\text{N}$, so net upward force $= 23.5\,\text{N}$ — the block would pop back up if released.) 1 pt: correct formula. 1 pt: correct upthrust.
FRQ 3. 7 points4.3
A U-tube contains water ($\rho_w = 1000\,\text{kg/m}^3$) on the left and oil ($\rho_o = 800\,\text{kg/m}^3$) on the right. The liquids do not mix. The oil column is $12\,\text{cm}$ higher than the water column, measured from the interface.
(a)3 pts Derive the relationship between the heights and densities at the interface level.
(b)2 pts Calculate the height of the water column above the interface.
(c)2 pts If the oil is replaced with mercury ($\rho = 13{,}600\,\text{kg/m}^3$), what happens to the mercury level relative to the water? Calculate the new height difference.
(a) (3 pts): At the interface (same horizontal level in the same liquid), pressures are equal: $P_{atm} + \rho_w g h_w = P_{atm} + \rho_o g h_o$. The atmospheric pressure cancels: $\rho_w h_w = \rho_o h_o$. 1 pt: identifies equal pressure at interface. 1 pt: cancels $P_{atm}$. 1 pt: correct relationship.
(c) (2 pts): Mercury is denser than water, so the mercury column will be shorter than the water column. $\rho_w h_w = \rho_{Hg} h_{Hg}$. $1000 \times 0.48 = 13{,}600 \times h_{Hg}$. $h_{Hg} = 0.035\,\text{m}$ (3.5 cm). The water column is $48\,\text{cm}$ higher than mercury. 1 pt: identifies mercury is lower. 1 pt: correct height calculation.
FRQ 4. 5 points4.1 / 4.2
A uniform door of weight $120\,\text{N}$ and width $0.90\,\text{m}$ is hinged at one edge. A horizontal force is applied at the opposite edge to hold the door open at $60^{\circ}$ to the wall.
(a)2 pts Draw a free-body diagram showing all forces on the door.
(b)3 pts Calculate the horizontal force $F$ needed to hold the door open. Take moments about the hinge.
(a) (2 pts): FBD should show: Weight $120\,\text{N}$ (downward from centre of door), Applied force $F$ (horizontal at the far edge), Hinge reaction (two components: horizontal and vertical). 1 pt: weight and applied force. 1 pt: hinge reaction components.
(b) (3 pts): Take moments about the hinge. The perpendicular distance from the hinge to the line of action of weight: $d_w = (0.90/2)\sin 60^{\circ} = 0.45 \times 0.866 = 0.390\,\text{m}$ (weight acts at centre, $0.45\,\text{m}$ from hinge, at $60^{\circ}$). The perpendicular distance for $F$: $d_F = 0.90\cos 60^{\circ} = 0.45\,\text{m}$. Clockwise: $120 \times 0.390 = 46.8\,\text{Nm}$. Anticlockwise: $F \times 0.45$. $F = 46.8/0.45 = 104\,\text{N}$. 1 pt: correct perpendicular distances. 1 pt: correct moment equation. 1 pt: correct force.
FRQ 5. 5 points4.3
A submarine is at a depth of $50\,\text{m}$ below the surface of the sea. The density of seawater is $1030\,\text{kg/m}^3$, atmospheric pressure is $101\,\text{kPa}$, and $g = 9.8\,\text{m/s}^2$. The submarine has a volume of $2000\,\text{m}^3$.
(a)2 pts Calculate the total pressure on the submarine's hull.
(b)2 pts Calculate the upthrust on the submarine.
(c)1 pt If the submarine's mass is $2.06 \times 10^6\,\text{kg}$, does it float or sink? Justify with a calculation.