Skip to lesson
1

Topic 4 · Forces, Density & Pressure

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

Current AS syllabus boundary
4.1 Turning effects of forces 4.2 Equilibrium of forces 4.3 Density and pressure

Core target: centre of gravity, moments and couples, equilibrium and force triangles, density, pressure, the derivation/use of $\Delta p=\rho g\Delta h$, and upthrust $F=\rho gV$.

4.1 · Centre of Gravity

  • A force’s turning effect depends on its line of action as well as its magnitude.
  • Pressure describes perpendicular force per area.
  • Density relates the mass and volume of a material; these are different physical quantities.
Centre of gravity (CoG)

The centre of gravity is the point at which the whole weight of an object may be considered to act.

In a uniform gravitational field, draw the weight force vertically downward through the CoG.

CoG W pivot

Why does a suspended object settle with its CoG below the pivot?

If the line of action of weight does not pass through the pivot, weight produces a moment and the object rotates. At rest, the CoG lies vertically below the pivot so the weight has zero moment about the pivot.

Finding an irregular CoG: suspend from two different points and draw a vertical plumb line each time. Their intersection gives the CoG.

4.1 · Moment of a Force

The definition Cambridge wants

The moment of a force about a point is:

$$\boxed{M=F\,d_\perp}$$

where $d_\perp$ is the perpendicular distance from the point (pivot) to the line of action of the force. Unit: $\mathrm{N\,m}$.

Moment arm: shortest distance to the force lineMoment arm: shortest distance to the force linepivotFlever arm rdistance d⊥M = Fd⊥ = Fr sin θ

Two safe methods

Method A: find $d_\perp$ directly.

Method B: if $\theta$ is the angle between the lever arm $\vec r$ and the force, use

$$M=Fr\sin\theta.$$

The moment is greatest for a given $F$ and $r$ when the force is perpendicular to the lever ($\theta=90^\circ$).

Moment trap · do not use the wrong distance

The distance in $M=Fd_\perp$ is not automatically the length of the beam. It is the shortest perpendicular distance from the pivot to the force's line of action.

Quick Check 1
A 24 N force acts at the end of a 0.50 m wrench at $30^\circ$ to the wrench. Find the moment about the nut.
$M=Fr\sin\theta=(24)(0.50)\sin30^\circ=6.0\,\mathrm{N\,m}$.
Your turn · Find the moment of an 8.0 N force whose perpendicular lever arm is 0.25 m.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

2

4.1 · Couples & Resultant Turning Effect

Couple

A couple consists of two equal, opposite and parallel forces whose lines of action are separated. The resultant force is zero, but the pair produces rotation.

$$\boxed{\text{torque of a couple}=F\,s}$$

$s$ is the perpendicular separation between the two lines of action.

Couple: separation is perpendicular to both force linesCouple: separation is perpendicular to both force linesFFs = perpendicular separationTorque = Fs; the resultant force is zero.

Angled couple

Never double one force's moment by guesswork. Find the perpendicular separation $s$ between the two force lines, then use $Fs$.

If equal opposite forces act at the ends of a beam of length $L$ and each force makes angle $\theta$ with the beam, then $s=L\sin\theta$.

Single force

Can give a resultant force and a moment.

$M=Fd_\perp$ about a specified point.

Couple

Resultant force $=0$ but resultant torque $\ne0$.

Torque $=F\times$ force separation.

Resultant force and resultant torque are separate questions

Resultant forceResultant torqueWhat can happen?
00Equilibrium: rest or constant velocity, no angular acceleration
not 00Linear acceleration without angular acceleration about the chosen CoG model
0not 0Pure turning tendency — a couple is the classic example
not 0not 0Both translational and rotational effects may occur
Minimum-force technique

For a required moment $M$ at fixed distance $r$, $F=M/(r\sin\theta)$. The minimum force occurs when $\sin\theta=1$, so apply the force at $90^\circ$ to the lever.

Quick Check 2
Two 10 N equal and opposite parallel forces have a perpendicular separation of 0.40 m. What is the torque of the couple?
$\tau=Fs=(10)(0.40)=4.0\,\mathrm{N\,m}$. Do not multiply by 2.
3

4.2 · Equilibrium of Forces

  • For equilibrium, require both zero resultant force and zero resultant moment.
  • Choose a pivot that removes an unknown force’s moment.
  • In a stationary liquid, pressure differences depend on vertical depth differences, not container shape.
Both conditions are needed
$$\boxed{\sum \vec F=0}\qquad\boxed{\sum M=0}$$

No resultant force means no linear acceleration. No resultant torque means no angular acceleration.

An object in equilibrium does not have to be stationary: it may move with constant velocity.

Principle of moments

For a body in rotational equilibrium, the sum of clockwise moments about any point equals the sum of anticlockwise moments about that point.

$$\sum M_{\rm clockwise}=\sum M_{\rm anticlockwise}$$

Beam / ladder / hinge method

  1. Draw every external force and its line of action. Put the object's own weight at its CoG.
  2. Choose a pivot through an awkward unknown reaction so that its moment is zero.
  3. Use clockwise moments = anticlockwise moments.
  4. Then use $\sum F_x=0$ and $\sum F_y=0$ for the remaining forces.
  5. Check the direction and physical reasonableness of every reaction/tension.
T W hinge reaction R

Three-force concurrency

If a rigid body is in equilibrium under exactly three non-parallel coplanar forces, their lines of action must meet at one point. Otherwise one force would leave an unbalanced moment.

This is a powerful way to infer the direction of an unknown hinge reaction.

Force triangle — not just a phrase

F₁ F₂ F₃ head-to-tail closes
  1. Choose a scale and direction for one force.
  2. From its arrowhead draw the second force.
  3. Draw the third force head-to-tail.
  4. If the object is in equilibrium, the final arrowhead returns to the start: $\vec F_1+\vec F_2+\vec F_3=0$.
Equilibrium trap

$\sum F=0$ alone is not enough for a rigid body. Equal opposite forces on different lines can give zero resultant force but still form a couple and rotate the body.

Which conditions are needed for complete static equilibrium?

4

4.3 · Density & Pressure

Density
$$\boxed{\rho=\frac{m}{V}}$$

SI unit: $\mathrm{kg\,m^{-3}}$.

Always convert mass and volume consistently before substitution.

Pressure
$$\boxed{p=\frac{F}{A}}$$

Pressure is normal force per unit area.

SI unit: $\mathrm{Pa}=\mathrm{N\,m^{-2}}$.

Mixture technique

Do not average densities unless the situation actually makes that valid. Use:

$$\rho_{\rm mix}=\frac{m_{\rm total}}{V_{\rm total}}.$$

If no volume change occurs, find each volume from $V=m/\rho$, add the volumes, then divide total mass by total volume.

Derive the hydrostatic pressure equation

Δh volume = AΔh area A weight
  1. Take a fluid column of cross-sectional area $A$ and vertical height difference $\Delta h$.
  2. $V=A\Delta h$, so $m=\rho A\Delta h$.
  3. Its weight is $mg=\rho A\Delta h\,g$.
  4. The pressure difference supports this weight: $\Delta p=\Delta F/A$.
$$\boxed{\Delta p=\rho g\Delta h}$$
Pressure difference, not automatically total pressure

The syllabus relation is $\Delta p=\rho g\Delta h$. If a liquid surface is open to the atmosphere, the gauge pressure at depth $h$ is $\rho gh$, while the absolute/total pressure is $p_{\rm atm}+\rho gh$.

Pressure–depth graph toolkit

depth h pressure p gradient = Δp/Δh = ρg intercept may be p_atm
$$\boxed{\text{gradient}=\frac{\Delta p}{\Delta h}=\rho g}$$ $$\boxed{\rho=\frac{\text{gradient}}{g}}$$

If the graph shows pressure due to the liquid only, it passes through the origin. If it shows absolute pressure in an open tank, the intercept is approximately atmospheric pressure.

Quick Check 3
A pressure–depth graph has gradient $7.85\times10^3\,\mathrm{Pa\,m^{-1}}$. Find the liquid density using $g=9.81\,\mathrm{m\,s^{-2}}$.
$\rho=(7.85\times10^3)/9.81\approx800\,\mathrm{kg\,m^{-3}}$.
5

4.3 · U-Tubes, Manometers & Layered Fluids

Same-level pressure rule

In a connected liquid at rest, points at the same horizontal level in the same liquid have the same pressure.

Choose a convenient common level and work down from each free surface, adding $\rho g h$ for every layer crossed.

compare here liquid 1 liquid 2

Open U-tube technique

If both free surfaces are at atmospheric pressure, $p_{\rm atm}$ cancels when you equate pressure at the same level.

For a simple two-liquid arrangement this often becomes $\rho_1 h_1=\rho_2 h_2$, but derive it from pressure balance rather than memorising it blindly.

The $2h$ manometer trap

If one level rises by $h$ while the other side falls by $h$, the final vertical difference between the two surfaces is $2h$. The pressure difference is then $\Delta p=\rho g(2h)$, not $\rho gh$.

Layer-by-layer pressure

$$\boxed{\Delta p_{\rm total}=g(\rho_1 h_1+\rho_2 h_2+\cdots)}$$

For a borehole or tank containing several liquid layers, calculate the pressure contribution from each layer separately and add them. Add atmospheric pressure only if the question asks for absolute/total pressure and the top surface is exposed to the atmosphere.

Quick Check 4
A tank has 1.5 m of oil ($800\,\mathrm{kg\,m^{-3}}$) above 2.0 m of water. Find the gauge pressure at the bottom using $g=9.81\,\mathrm{m\,s^{-2}}$.
$\Delta p=g[(800)(1.5)+(1000)(2.0)]\approx3.14\times10^4\,\mathrm{Pa}$.
6

4.3 · Upthrust & Archimedes' Principle

Physical origin

Fluid pressure acts normal to a surface and increases with depth. Therefore the pressure forces on the lower parts of an immersed object are greater than those on the upper parts. Their resultant is an upward force called upthrust.

smaller larger pressure increases with depth

At the same depth, opposite horizontal pressure forces balance. Vertically, the deeper pressure is larger, giving a net upward resultant.

From pressure difference to $F=\rho gV$

For a vertical-sided block with horizontal top/bottom area $A$ and vertical height $h$:

$$F_{\rm up}=(p_b-p_t)A$$ $$p_b-p_t=\rho gh$$ $$F_{\rm up}=\rho ghA$$

Since $Ah=V_{\rm displaced}$:

$$\boxed{F_{\rm up}=\rho gV_{\rm displaced}}$$

This is Archimedes' principle: the upthrust equals the weight of the displaced fluid.

SituationForce comparisonMotion tendency
Floating at rest$F_{\rm up}=W$Equilibrium
Fully submerged, no other forces, $\rho_{\rm object}=\rho_{\rm fluid}$$F_{\rm up}=W$Neutral buoyancy
$F_{\rm up}>W$Resultant upwardAccelerates upward
$F_{\rm up}<W$Resultant downwardAccelerates downward
Floating fraction shortcut — derive it, don't memorise it blindly

For a floating object with no other vertical forces:

$$\rho_{\rm fluid}V_{\rm disp}g=\rho_{\rm object}V_{\rm object}g$$ $$\boxed{\frac{V_{\rm disp}}{V_{\rm object}}=\frac{\rho_{\rm object}}{\rho_{\rm fluid}}}$$
Quick Check 5
A block of volume $3.0\times10^{-3}\,\mathrm{m^3}$ is fully immersed in a liquid of density $850\,\mathrm{kg\,m^{-3}}$. Find the upthrust using $g=9.81\,\mathrm{m\,s^{-2}}$.
$F_{\rm up}=(850)(9.81)(3.0\times10^{-3})\approx25.0\,\mathrm{N}$.
7

Topic 4 · Exam Toolbox

Master equation sheet
IdeaEquation / testUse it when...
Moment$M=Fd_\perp=Fr\sin\theta$A force tends to turn about a point
Couple$\tau=Fs$Equal opposite parallel forces; $s$ is perpendicular separation
Equilibrium$\sum\vec F=0$, $\sum M=0$No linear or angular acceleration
Density$\rho=m/V$Relate mass and volume
Pressure$p=F/A$Normal force per unit area
Hydrostatic$\Delta p=\rho g\Delta h$Pressure difference between depths
Pressure graphgradient $=\rho g$Find density from $p$–$h$ data
Layered fluids$\Delta p=g\sum\rho_i h_i$Several fluid layers
Upthrust$F_{\rm up}=\rho gV_{\rm disp}$Weight of displaced fluid
Seven high-value techniques
  1. Moment: draw the line of action, then locate the perpendicular distance.
  2. Equilibrium: choose a pivot that removes an unknown reaction, then resolve forces.
  3. Three forces: use concurrency + a closed force triangle when appropriate.
  4. Density mixture: total mass divided by total volume.
  5. Hydrostatic: decide whether the question wants pressure difference, gauge pressure or absolute pressure.
  6. U-tube: equate pressures at the same horizontal level and check whether a level change becomes $2h$.
  7. Upthrust: pressure difference first; displaced-fluid weight second.
Final mistake checklist
  • Using beam length instead of perpendicular moment arm.
  • Multiplying couple torque by 2.
  • Forgetting the object's own weight acts at its CoG.
  • Thinking equilibrium means “stationary” rather than “zero linear and angular acceleration”.
  • Drawing a force triangle that does not close head-to-tail.
  • Averaging densities instead of using total mass / total volume.
  • Using $p=\rho gh$ as absolute pressure when atmospheric pressure matters.
  • Using $h$ instead of $2h$ after equal level changes in a U-tube.
  • Saying upthrust occurs because an object is less dense, instead of because pressure changes with depth.
Current syllabus completion check · all 13 outcomes
#Current syllabus requirementWhere mastered
1Weight acts at centre of gravityPage 1
2Define/apply moment of a forcePage 1
3Understand a couplePage 2
4Define/apply torque of a couplePage 2
5Principle of momentsPage 3
6No resultant force and no resultant torque in equilibriumPage 3
7Vector triangle for coplanar forces in equilibriumPage 3
8Define/use densityPage 4
9Define/use pressurePage 4
10Derive $\Delta p=\rho g\Delta h$Page 4
11Use $\Delta p=\rho g\Delta h$Pages 4–5
12Upthrust due to hydrostatic pressure differencePage 6
13Calculate upthrust $F=\rho gV$Page 6
One connected picture

Forces can translate and turn. Equilibrium requires both effects to balance. In fluids, pressure changes with depth, and that pressure difference is exactly what produces upthrust.