Skip to lesson
AS Physics · Topic 3: Dynamics 3.1 Newton's Laws 3.1 Momentum 3.3 Conservation 3.1 Force Problems 3.2 Non-Uniform Exam Review
1

Topic 3 · Dynamics

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

Examiner's Note — Topic 3 at a glance
Dynamics is central to the whole mechanics section — expect the ideas to appear across Paper 1 and Paper 2, often embedded in multi-step mechanics questions. It connects directly to Topic 2 (Kinematics) through $F = ma$.

Five big ideas: (1) Newton's three laws govern all motion; (2) force is the rate of change of momentum ($F = \Delta p / \Delta t$); (3) total momentum is conserved for a chosen system when the resultant external impulse is zero or negligible; (4) free-body diagrams are the key tool for solving force problems; (5) terminal velocity occurs when drag equals weight.

The exam loves momentum conservation calculations (especially sticking-together collisions), impulse from force-time graphs, Newton's 3rd law pair identification, and connected-body problems (pulleys, towed vehicles).

3.1A · Newton's Laws, Mass & Weight

Newton's First Law (Inertia)
An object remains at rest or moves at constant velocity unless acted upon by a resultant (net) force.

Key implication: if $F_{net} = 0$, then $a = 0$ (constant velocity or stationary). This is the principle of equilibrium.

Mass is a measure of inertia — the resistance to acceleration. Larger mass = harder to accelerate ($a = F/m$).
Newton's Second Law (F = ma)
The resultant force on an object equals its mass times its acceleration: $$\boxed{F = ma}$$ More precisely, force is the rate of change of momentum: $$\boxed{F = \frac{\Delta p}{\Delta t}}$$ For constant mass: $F = m\frac{\Delta v}{\Delta t} = ma$.

Resultant force and acceleration are always in the same direction.

Units: 1 newton (N) = force needed to give 1 kg an acceleration of 1 m/s$^2$. So $1\,\text{N} = 1\,\text{kg}\cdot\text{m/s}^2$.
Newton's Third Law (Action-Reaction)
For every action force, there is an equal and opposite reaction force. If body A exerts a force on body B, then B exerts an equal and opposite force on A.

Key rules for 3rd law pairs:
  • Same magnitude, opposite direction.
  • Act on different bodies (not the same body).
  • Same type of force (both gravitational, both contact, etc.).
Trap: weight and normal contact force are NOT a 3rd law pair! They both act on the same object. The 3rd law pair of weight is the gravitational pull of the object on the Earth. The 3rd law pair of normal force is the push of the object on the surface.
Exam Pattern — identifying 3rd law pairs
The exam asks "what is equal and opposite to the backward push of the tyre on the road?" Answer: the forward push of the road on the tyre (not the engine force, not the air resistance — those act on different objects).

Always check: the pair must act on different bodies, be equal in magnitude, opposite in direction, and be the same type of force.

3.1B · Momentum & Force as Rate of Change

Linear momentum
$$\boxed{p = mv}$$ Momentum is a vector (same direction as velocity). SI unit: $\text{kg}\cdot\text{m/s}$ (or $\text{N}\cdot\text{s}$).

Impulse is the change in momentum. For a constant force, or when using the average force, $$\boxed{F_{\text{avg}}\Delta t = \Delta p}$$ Impulse is a vector. SI unit: $\text{N}\cdot\text{s}$ (the same dimensions as momentum).

From force–time graphs: the signed area under the graph gives the impulse, so it gives $\Delta p$. For a changing force, use the graph area rather than blindly using a peak force times the whole contact time.
Quick Check 1
A 0.15 kg ball hits a wall at $12\,\text{m/s}$ and rebounds at $8\,\text{m/s}$. The contact time is $0.05\,\text{s}$. Find the average force on the ball.
Take initial direction as positive. $u = +12$, $v = -8$ (rebounds).
$\Delta p = m(v - u) = 0.15(-8 - 12) = 0.15 \times (-20) = -3.0\,\text{kg}\cdot\text{m/s}$.
$F = \Delta p / \Delta t = -3.0 / 0.05 = -60\,\text{N}$.
The force is $60\,\text{N}$ in the opposite direction (away from wall).
Where does the Newton’s third-law partner of a force on a trolley act?

2

3.3 · Linear Momentum & Its Conservation

  • Resolve forces along convenient axes.
  • In one dimension, momentum has a sign.
  • Conservation of total momentum requires negligible external impulse on the chosen system; internal forces can still change each object’s momentum.
Principle of conservation of momentum
For a chosen system, when the resultant external impulse is zero or negligible, the total momentum before = total momentum after: $$\boxed{m_1 u_1 + m_2 u_2 = m_1 v_1 + m_2 v_2}$$ This applies to collisions, explosions, and recoil.

Key method: choose a positive direction, assign signs to all velocities, set total $p_{before} = p_{after}$, solve for the unknown.
Types of collision
TypeMomentum conserved?Kinetic energy conserved?Notes
ElasticYesYesRelative speed of approach = relative speed of separation
InelasticYesNo (KE is lost)Objects may stick together; KE converted to heat/sound/deformation
Perfectly inelasticYesNoObjects stick together: $v = \frac{m_1 u_1 + m_2 u_2}{m_1 + m_2}$
Explosions: objects start at rest (total $p = 0$) and fly apart. Momentum still conserved: $m_1 v_1 + m_2 v_2 = 0$, so $v_1/v_2 = -m_2/m_1$.
Exam Pattern — elastic collision shortcut
For a one-dimensional perfectly elastic collision between two objects: $$\text{Relative speed of approach} = \text{Relative speed of separation}$$ $$u_1 - u_2 = v_2 - v_1$$ This plus momentum conservation gives you two equations to solve for two unknowns.

Special case: equal masses, one stationary $\to$ the moving one stops, the stationary one moves at the same speed (like Newton's cradle).
Quick Check 2
A 2 kg trolley moving at $4\,\text{m/s}$ collides with a stationary 4 kg trolley. They stick together. Find their common velocity and the kinetic energy lost.
Momentum before: $(2 \times 4) + (4 \times 0) = 8\,\text{kg}\cdot\text{m/s}$.
After: $(2+4)v = 6v$. So $6v = 8$, $v = 1.33\,\text{m/s}$.
$KE_{before} = \frac{1}{2}(2)(16) = 16\,\text{J}$. $KE_{after} = \frac{1}{2}(6)(1.78) = 5.33\,\text{J}$.
KE lost $= 16 - 5.33 = 10.67\,\text{J}$.
3

3.1C · Free-Body Problem Solving

  • A free-body diagram shows forces acting on one chosen object.
  • A resultant force changes its momentum.
  • Newton’s third-law partner acts on the other interacting object, so it does not cancel a force on the first object.
Key forces in dynamics
ForceFormulaDirection
Weight$W = mg$Always downward (toward Earth's center)
Normal contact force$N$ (varies)Perpendicular to surface, away from surface
Friction$F_f$ (varies)Parallel to the contact surface; opposes relative sliding or the tendency to slide
Tension$T$ (varies)Along the string/rope, away from the object
Drag/Air resistanceIncreases with speedOpposite to velocity
Mass vs weight: mass (kg) is constant everywhere; weight (N) depends on $g$. On the Moon ($g = 1.6$), a 10 kg object has mass 10 kg but weight only 16 N.
Free-body diagrams
A free-body diagram shows all forces acting on a single object as arrows.

Method:
  1. Isolate the object (draw it as a dot or box).
  2. Draw weight (downward) from the center.
  3. Draw normal force (perpendicular to surface).
  4. Draw friction (parallel to surface, opposing motion).
  5. Draw any applied forces or tension.
  6. Resolve forces into components if needed.
  7. Apply $F_{net} = ma$ in each direction.
block W = mg N F f

Free-body diagram: block on rough surface

Four forces: Weight $W = mg$ (down), Normal $N$ (up), Applied force $F$ (right), Friction $f$ (left).

Vertically: $N = mg$ (no vertical acceleration).

Horizontally: $F_{net} = F - f = ma$.

Common Mistake — connected bodies
For connected bodies (e.g., two blocks joined by a string, or a car towing a trailer):
  1. Treat the whole system as one object to find acceleration: $F_{external} = (m_{total}) \times a$.
  2. Then isolate one body and apply $\sum F=m_{one}a$ to find the tension. Only when tension is its sole unbalanced force does this reduce to $T=m_{one}a$.
Trap: do not assume tension equals the applied force. Isolate one body and use the forces acting on that body. The numerical relation between tension and the applied force depends on the masses and any resistive forces.
Your turn · Find acceleration of a 2.5 kg object under a resultant force of 7.5 N.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

4

3.2 · Non-Uniform Motion

Terminal velocity — Topic 3 core idea
An object falling through air experiences:
  • Weight $W = mg$ (constant, downward).
  • Drag $D$ (upward, increases with speed).
Using Newton's 2nd law: $F_{net} = mg - D = ma$.

Three stages:
  1. Initially: $D \approx 0$, so $a \approx g$ (free fall).
  2. Speeding up: $D$ increases, so $F_{net}$ decreases, $a$ decreases (still accelerating, but less).
  3. Terminal velocity: $D = mg$, so $F_{net} = 0$, $a = 0$, $v = v_t$ (constant).
Current-syllabus boundary
For resistive motion, you need a qualitative model: drag/friction opposes motion and drag increases as speed increases. No coefficient-of-friction formula, viscosity coefficient or assumed law such as $D=kv$ is required here. For collisions, two-dimensional momentum conservation and the elastic relative-speed condition are part of the topic.

Topic 3 · Exam Review

Assessment patterns to master
  • Newton's laws: identify the correct statement, isolate a body and apply $F = ma$ using the resultant force.
  • Momentum conservation: use signed velocities carefully in one- and two-dimensional interactions.
  • Force as rate of change of momentum, including interpretation of momentum–time and force–time representations.
  • Newton's 3rd law: identify equal-and-opposite interaction forces acting on different bodies.
  • Mass and weight: distinguish inertia from gravitational force and use $W=mg$.
  • Non-uniform motion: connect increasing drag, changing resultant force and terminal velocity.
  • Paper 2 structured work: multi-stage force/momentum reasoning, collision calculations, graphs and explanations.
Master Equation Sheet
ConceptFormulaNotes
Newton's 2nd law$F = ma$Resultant force; $F$ and $a$ same direction
Force = rate of change of momentum$F = \Delta p / \Delta t$More general form
Momentum$p = mv$Vector; units kg$\cdot$m/s
Impulse / momentum change$J=\Delta p=F_{\text{avg}}\Delta t$Signed area under a force–time graph
Conservation of momentum$m_1 u_1 + m_2 u_2 = m_1 v_1 + m_2 v_2$No external forces
Perfectly inelastic (stick)$v = \frac{m_1 u_1 + m_2 u_2}{m_1 + m_2}$Common velocity after
Elastic collision$u_1 - u_2 = v_2 - v_1$Relative speed of approach = separation
Weight$W = mg$$g \approx 9.81\,\text{m/s}^2$ on Earth
Terminal velocity$D = mg$Drag = weight, $a = 0$
Topic 3 in one sentence
Resultant force gives acceleration and rate of change of momentum; total momentum is conserved when external impulse is negligible; collision energy must be checked separately; and during a fall through air, increasing drag reduces the resultant force until terminal velocity is reached.