Skip to lesson
1

Topic 25 · Astronomy and Cosmology

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

  • Observed brightness depends on both a star’s luminosity and its distance.
  • A spectrum gives temperature information and line shifts.
  • Combine different observations rather than treating apparent brightness as a direct size measurement.
Cambridge International A Level Physics 9702

Core idea: light carries remote measurements. Flux gives distance when luminosity is known; spectra give temperature and speed; the distance–speed pattern reveals cosmic expansion.

Exact syllabus boundary
25.1 luminosity, radiant flux intensity and standard candles; 25.2 Wien and Stefan–Boltzmann radius estimates; 25.3 redshift, Hubble expansion and Big Bang evidence. Detailed stellar evolution, parallax and dark-energy models are outside Topic 25.
Inverse-square spreading of luminosityA star emits luminosity L in all directions. At distance d the same power is spread across a sphere of area four pi d squared, so received radiant flux intensity is L divided by four pi d squared.area = 4πd²F = L / 4πd²same L, larger area → smaller F
Luminosity L: total radiant power emitted by a star; unit W.
Radiant flux intensity F: power received per unit area; unit W m⁻².
$F=L/(4\pi d^2)$
Common mistake
Luminosity is intrinsic to the source. Flux changes with observer distance.
Explain · The distance to an isotropically emitting star doubles. With unchanged luminosity, observed flux becomes…

Your turn · A star has flux 80 W/m² at distance d. Find flux at 2d with unchanged luminosity.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

2

Standard candles and distance

Standard-candle distance methodA nearby calibrated object establishes an intrinsic luminosity for a class of source. A distant object of the same class has measured flux. Combining known luminosity with measured flux gives its distance.calibrate Lknown distancesame class: known Lmeasure F → infer d
A standard candle is an astronomical object whose luminosity can be determined independently or is known from calibration.
  1. Identify/calibrate a source class with known luminosity $L$.
  2. Measure its received flux $F$.
  3. Assume approximately isotropic emission and apply $d=\sqrt{L/(4\pi F)}$.
  4. State uncertainties: luminosity calibration, attenuation and flux measurement affect inferred distance.
Definition trap
A standard candle does not have “the same apparent brightness”. Its known luminosity is compared with measured flux.
3

Wien displacement law

  • For isotropic emission, flux falls with distance squared.
  • Wien’s law links peak wavelength and temperature; Stefan–Boltzmann relates luminosity, radius and temperature.
  • Redshift provides recession evidence within the stated cosmological model.
Black-body spectra · hotter curve stays above cooler curveBlack-body spectra · hotter curve stays above cooler curveintensityλ6000 K4500 KHigher T: shorter peak wavelength and greater intensity at each wavelength.
$\lambda_{max}T=b$,   $b\approx2.90\times10^{-3}\,\mathrm{m\,K}$

A hotter stellar surface has a shorter peak wavelength. Always use kelvin and metres.

Redshift correction
For a distant receding source, the observed spectrum is shifted to longer wavelengths. Use the emitted/rest-frame peak for surface temperature; otherwise temperature is underestimated.
Graph trap
The curve maximum determines $\lambda_{max}$. Do not use the midpoint of the visible band or the wavelength of a narrow absorption line.
4

Stefan–Boltzmann law and stellar radius

Stellar luminosity from surface area and temperatureA spherical star of radius r has surface area four pi r squared. Each square metre emits power sigma T to the fourth, giving luminosity four pi sigma r squared T to the fourth.rsurface area = 4πr²power per area = σT⁴L = 4πσr²T⁴
$L=4\pi\sigma r^2T^4$

$\sigma=5.67\times10^{-8}\,\mathrm{W\,m^{-2}\,K^{-4}}$. The $4\pi r^2$ is the surface area of a spherical star.

$r=\sqrt{L/(4\pi\sigma T^4)}$
IfAt fixed other variable
radius doublesluminosity ×4
temperature doublesluminosity ×16
luminosity known with Tradius follows from square root
Power trap
Temperature is raised to the fourth power; radius is squared. Keep calculator brackets around $T^4$.
5

Combined observation chain

Flux + spectrum → radius

  1. Convert distance to metres.
  2. $L=4\pi d^2F$.
  3. Read or calculate emitted peak wavelength.
  4. $T=b/\lambda_{max}$.
  5. $r=\sqrt{L/(4\pi\sigma T^4)}$.
Ratio shortcut
For two stars, $L_1/L_2=(r_1/r_2)^2(T_1/T_2)^4$. Ratios cancel $4\pi\sigma$ and often reduce unit work.
Distance trap
In $F=L/(4\pi d^2)$, $d$ is source-to-observer distance—not stellar radius. In Stefan’s law, $r$ is stellar radius.
6

Spectral redshift and recession speed

Spectral redshift · the same fractional increaseSpectral redshift · the same fractional increaselaboratorygalaxy400 nm440 nm500 nm550 nm600 nm660 nmEach wavelength × 1.10: Δλ/λ = 0.10 (illustrative values).
Redshift is the displacement of spectral lines toward longer wavelength (lower frequency) compared with their laboratory/rest values.
$z=\Delta\lambda/\lambda\approx|\Delta f|/f\approx v/c$ for $v\ll c$

Use the rest wavelength in the denominator. For frequency, use the magnitude of the decrease. A consistent shift of a known line pattern supports recession rather than misidentification of one line.

Sign trap
A receding galaxy has $\lambda_{observed}>\lambda_{rest}$. The syllabus relation is normally used with positive shift magnitude and recession speed.
7

Hubble law and Big Bang evidence

Hubble recession-speed graphGalaxy recession speed is plotted against distance. The points scatter about a straight line through the origin. Its gradient is the Hubble constant in inverse seconds when SI units are used.v / m s⁻¹d / mgradient = H₀
$v\approx H_0d$

With $v$ in m s⁻¹ and $d$ in m, $H_0$ is in s⁻¹. A graph of recession speed against distance has gradient $H_0$.

Reasoning from the observations

Interpretation
This is expansion of large-scale distances, not galaxies flying from a special central point in pre-existing space.
Graph trap
If the axes are reversed, the gradient is $1/H_0$. Read axis labels before taking a gradient.
8

Paper 4 technique & master equation sheet

Observation-to-quantity map

  1. Known L + measured F → distance.
  2. Peak wavelength → surface temperature.
  3. L + T → stellar radius.
  4. Spectral-line shift → recession speed.
  5. Recession speed + distance → Hubble constant or missing variable.
  6. Trend across many galaxies → expansion evidence → earlier denser/hotter universe.

Master equations

flux$F=L/(4\pi d^2)$
Wien$\lambda_{max}T=2.90\times10^{-3}\,\mathrm{m\,K}$
Stefan–Boltzmann$L=4\pi\sigma r^2T^4$
redshift$\Delta\lambda/\lambda\approx|\Delta f|/f\approx v/c$
Hubble$v\approx H_0d$
Final traps
  • L is W; F is W m⁻²
  • inverse square needs $d^2$
  • Wien uses emitted peak
  • Stefan uses $T^4$ and $r^2$
  • redshift denominator is rest wavelength
  • use SI for $H_0$
Useful conversion
$1\,\mathrm{pc}=3.09\times10^{16}\,\mathrm m$. Convert before using the inverse-square or Hubble equation.