Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
Simple harmonic motion is identified by acceleration proportional to displacement and opposite in direction.
The minus sign in a = −ω²x expresses the restoring direction, not a permanently negative acceleration.
Cambridge International A Level Physics 9702
The whole topic in one idea: SHM is motion whose acceleration is proportional to displacement and always directed back towards one fixed equilibrium point.
Exact syllabus boundary
17.1 SHM quantities, equations and graphs; 17.2 energy in SHM; 17.3 damping and resonance. Spring/pendulum period formulae are not required recall outcomes.
Quantity
Meaning
Link
displacement x
directed distance from equilibrium
can be positive or negative
amplitude x₀
maximum magnitude of displacement
x₀ ≥ 0
period T
time for one complete oscillation
T=1/f=2π/ω
frequency f
oscillations per unit time
f=1/T
angular frequency ω
phase advance per unit time
ω=2πf
phase difference
fraction of a cycle separating two oscillations
2π rad = 360° = one cycle
Simple harmonic motion occurs when acceleration is directly proportional to displacement from a fixed point and is directed opposite to the displacement: $a=-ω^2x$.
Common mistake
“Acceleration is proportional to displacement” is incomplete. The opposite direction and the fixed equilibrium point are essential.
2
Equations, signs & phase
$x=x_0\sin ωt$
$v=v_0\cos ωt=\pm ω\sqrt{x_0^2-x^2}$, where $v_0=ωx_0$
$a=-ω^2x$ and $a_0=ω^2x_0$
Position
speed
|acceleration|
energy state
x=0
maximum
zero
KE maximum
0<|x|<x₀
between zero and maximum
ω²|x|
KE and PE both present
|x|=x₀
zero
maximum
PE maximum
Resolve the ± sign
The speed equation gives a magnitude. Choose the sign of velocity from the stated direction of motion, not from the sign of x.
Quick Check 1
At x<0 while moving towards equilibrium, what are the signs of v and a?
v is positive because motion is towards increasing x; a is positive because it points towards equilibrium.
3
Graph reading & proving SHM
The acceleration–displacement test
For SHM, an $a$–$x$ graph is a straight line through the origin with a negative gradient.
Choose x from the equilibrium point and a positive direction.
Write every force with a sign.
Find the resultant and use $F=ma$.
Rearrange to $a=-kx$ where k is a positive constant.
Compare with $a=-ω^2x$ to identify ω.
Worked proof
If a trolley experiences $F=-36x$ and has mass 0.250 kg, then $a=F/m=-144x$. Hence $ω^2=144$, $ω=12.0$ rad s⁻¹ and $T=2π/ω=0.524$ s.
Graph trap
A sinusoidal-looking trace alone does not prove SHM. The defining evidence is $a\propto -x$.
Phase from time
$\Delta φ=2π\Delta t/T$. State the order as well as the size: “v leads x by π/2” is more informative than “phase difference π/2”.
4
Energy in simple harmonic motion
With no damping, total energy is constant while kinetic and potential energy exchange continuously.
$E=\tfrac12mω^2x_0^2$
Derived energy tools
The current syllabus requires recall of the total-energy expression above. The component relations $E_P=\tfrac12mω^2x^2$ and $E_K=E-E_P=\tfrac12mω^2(x_0^2-x^2)$ are useful derived results; understand how to obtain/use them rather than treating them as extra recall formulae.
Amplitude–energy scaling
At equilibrium, speed is greatest and acceleration is zero.
At a turning point, displacement and acceleration magnitudes are greatest while speed is zero.
For ideal SHM, energy shifts between kinetic and potential stores while total energy stays constant.
If 36% of the total energy remains, the new amplitude is $\sqrt{0.36}=0.60$ of the original amplitude.
Common mistake
Losing 20% of energy does not mean losing 20% of amplitude. The remaining amplitude factor is $\sqrt{0.80}$.
Frequency clue
Displacement completes one cycle in T. Because energy depends on $x^2$ and $v^2$, KE and PE each complete two cycles in T.
5
Damped oscillations
Damping is caused by a resistive force that removes mechanical energy from an oscillating system.
Type
Motion
Return to equilibrium
light
oscillates with decreasing amplitude
crosses equilibrium repeatedly
critical
no oscillation
fastest return without overshoot
heavy
no oscillation
slower return than critical
Exam trap
A trace that does not cross equilibrium is not automatically critical. Compare return time: critical is the fastest non-oscillatory response.
Cause and effect
Restoring force produces the oscillation. Resistive force removes energy. Do not say the restoring force “uses up” the amplitude.
6
Forced oscillations & resonance
Resonance is the maximum-amplitude response when a system is forced at its natural frequency.
Why amplitude becomes large
At resonance, the periodic driver transfers energy efficiently over successive cycles because the driving frequency matches the natural frequency. Energy builds in the oscillator until losses balance the input. A larger resistive damping force removes more mechanical energy and therefore limits the resonant amplitude.
Boundary note
The current syllabus requires the resonance condition and the meaning of light, critical and heavy damping. Detailed resonance bandwidth and peak-shift rules are not treated here as recall requirements.
Quantity
Meaning
natural frequency
frequency at which the system oscillates when displaced and released
driving frequency
frequency of the external periodic force
resonance
driving frequency equals natural frequency and amplitude is maximum
Common mistake
Resonance is not “any large vibration” and not “two frequencies being close”. It is the maximum response at the natural frequency in the syllabus model.
Quick Check 2
Why is the amplitude maximum when the driving frequency equals the natural frequency?
The periodic force transfers energy efficiently over successive cycles at the natural frequency, so the oscillation energy and amplitude build to their maximum response.
7
Paper 4 technique & master sheet
State-first calculation routine
Mark equilibrium and choose a positive direction.
Write T, f, ω and x₀ in SI units.
State the current position and direction of motion.
Select the equation and keep signs until the final interpretation.
For graphs, name both axes and preserve phase, amplitude and period.
Master equations
frequency links
$f=1/T$, $ω=2πf=2π/T$
SHM definition
$a=-ω^2x$
solution
$x=x_0\sinωt$
velocity
$v=v_0\cosωt=\pmω\sqrt{x_0^2-x^2}$
maxima
$v_0=ωx_0$, $a_0=ω^2x_0$
total energy
$E=\tfrac12mω^2x_0^2$
phase
$\Deltaφ=2π\Delta t/T$
Final traps
amplitude is not peak-to-peak displacement
acceleration is zero at equilibrium, not maximum
velocity sign depends on direction
energy fraction must be square-rooted for amplitude
critical and heavy damping do not oscillate
Graph checklist
Correct starting value, initial gradient, period, amplitude, phase and decay. A labelled but physically inconsistent sketch cannot earn full credit.