Skip to lessonPCPHYSICS CRESTGlobal Physics Academy · Reach the Peak of Understanding.1
Topic 13 · Gravitational fields
Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
Cambridge International A Level Physics 9702
The whole topic in one idea: a mass changes the space around it. Field strength describes force per unit mass; potential describes energy per unit mass.
Exact syllabus boundary
13.1 gravitational fields; 13.2 force between point masses and circular/geostationary orbits; 13.3 field strength; 13.4 potential and potential energy. Kepler laws are not required. Escape-to-infinity is only a guided energy application, not a formula to memorise.
13.1 · Field and field strength
Gravitational field strength is force per unit mass.
Gravitational potential is work done per unit mass in bringing a small test mass from infinity.
With zero potential at infinity, an attractive isolated mass gives negative potential.
A gravitational field is a region in which a mass experiences a force. Gravitational field strength at a point is the gravitational force per unit mass on a small test mass placed at that point: $g=F/m$.
$\vec g=\dfrac{\vec F}{m}$ unit: $\mathrm{N\,kg^{-1}}$ (numerically equal to $\mathrm{m\,s^{-2}}$)
Field-line rules
Arrows show the force direction on a small positive test mass; lines never cross; closer spacing means a stronger field; outside an isolated sphere the pattern is radial and directed inward.
Common mistake
Field strength is not the force on every object. At one point, $g$ is fixed by the source masses; the force is $F=mg$ and depends on the test mass.
2
Newton’s law of gravitation
Any two point masses attract with force proportional to their mass product and inversely proportional to the square of their separation.
For points outside a uniform sphere, treat its mass as concentrated at its centre. Therefore $r$ is always centre-to-centre separation. If two spheres touch, $r=R_1+R_2$. For an object at altitude $h$, $r=R+h$.
Worked example
Masses $4.00\times10^3\,\mathrm{kg}$ and $7.50\times10^3\,\mathrm{kg}$ have centre separation $2.00\,\mathrm m$. $F=Gm_1m_2/r^2=5.00\times10^{-4}\,\mathrm N$. Each mass experiences the same force magnitude in the opposite direction.
Change
Force factor
one mass doubled
$2$
both masses doubled
$4$
separation doubled
$1/4$
separation tripled
$1/9$
Exam trap
Do not use the gap between surfaces in the inverse-square law. Mark both centres before writing a distance.
3
Circular orbits & geostationary satellites
For a circular orbit, gravity is the real inward force:
$\dfrac{GMm}{r^2}=\dfrac{mv^2}{r}=mr\omega^2$
Orbital speed
$v=\sqrt{GM/r}$. The satellite mass cancels. A closer circular orbit has a larger speed.
Orbital period
$T=2\pi r/v=2\pi\sqrt{r^3/(GM)}$. At fixed central mass, $T^2\propto r^3$ follows from the equations; do not label this as a required Kepler law.
Geostationary: all four conditions
Field is a vector; potential is a scalar.
Add their contributions differently.
Outside a spherical mass, r is measured from its centre.
A circular orbit needs gravitational force to provide the required inward resultant.
period is 24 h (the Earth’s rotation period),
orbit lies in the equatorial plane,
motion is west to east, the same sense as Earth’s rotation,
the satellite remains above the same point on the equator.
Geosynchronous vs geostationary
A 24 h period alone is geosynchronous. To be geostationary, the orbit must also be circular, equatorial and in the correct direction so the satellite stays above one point.
Quick Check 1
Why does satellite mass not appear in $v=\sqrt{GM/r}$?
Both gravitational force and required centripetal force are proportional to satellite mass, so $m$ cancels.
4
Field strength outside a sphere
Derive before using
For test mass $m$ outside source mass $M$, $F=GMm/r^2$. Divide by $m$ using $g=F/m$:
$g=\dfrac{GM}{r^2}$
The test mass cancels: field strength is a property of the location and source mass. At the surface, $g_s=GM/R^2$.
Near-surface constancy
If height $h$ is much smaller than planet radius $R$, then $r=R+h$ differs from $R$ by only a small fraction. Hence $g=GM/(R+h)^2$ changes very little, so treating $g$ as constant is a good approximation.
$\dfrac{g_h}{g_s}=\left(\dfrac{R}{R+h}\right)^2$
Graph trap
Specify whether an axis shows signed radial field or field-strength magnitude. The magnitude is positive and decreases as $1/r^2$; a signed outward coordinate would give inward $g$ as negative.
Quick Check 2
At distance $3R$ from a planet centre, what fraction of the surface field remains?
$g/g_s=(R/3R)^2=1/9$.
5
Gravitational potential & potential energy
Gravitational potential $\phi$ at a point is the work done per unit mass in bringing a small test mass from infinity to the point. The reference is $\phi=0$ at infinity.
$\phi=-\dfrac{GM}{r}$ $E_p=m\phi=-\dfrac{GMm}{r}$
The negative sign means energy is released as a mass moves inward from infinity. Closer to the source, potential is more negative. Moving outward makes potential increase toward zero.
For $M=5.00\times10^{24}\,\mathrm{kg}$, moving $m=600\,\mathrm{kg}$ from $r_1=7.00\times10^6\,\mathrm m$ to $r_2=1.40\times10^7\,\mathrm m$ gives $\Delta E_p=1.43\times10^{10}\,\mathrm J$. It is positive because the final potential is less negative.
Vector vs scalar
$\vec g$ has direction. $\phi$ and $E_p$ are scalars, so contributions from several masses add algebraically.
Zero field is not zero potential
At a point where fields cancel, the potentials from both masses are generally negative and add; potential need not be zero.
Common mistake
“Potential increases in magnitude” and “potential increases” are different. Moving outward: $\phi$ increases (for example, from $-60$ to $-20\,\mathrm{MJ\,kg^{-1}}$), while its magnitude decreases.
6
Paper 4 solving technique
The radius-first method
Draw the source centre and write every radius from that centre.
Choose the quantity: force $F$, field strength $g$, potential $\phi$ or potential energy $E_p$.
Keep the negative sign for potential/energy; use a positive magnitude for force/field unless direction is requested.
For an orbit, equate gravity to centripetal force before cancelling mass.
For a change, calculate final minus initial and interpret the sign in words.
Question phrase
Best starting equation
force between two bodies
$F=Gm_1m_2/r^2$
force on each kilogram
$g=GM/r^2$
energy per kilogram
$\phi=-GM/r$
energy of mass $m$
$E_p=-GMm/r$
circular satellite
$GMm/r^2=mv^2/r$
Guided unfamiliar context: escape
If a question defines arrival at infinity with zero final speed, use energy conservation with the supplied $E_p=-GMm/r$. Derive any speed relation during the answer. Do not memorise an extra formula as Topic 13 content.
Old-bank filtering
Kepler-law recall, social-policy essays, ideal-gas escape arguments and non-syllabus orbit types are not core Topic 13 requirements. Only the underlying stated gravitational physics is retained.